Jun 1, 2017 · Replacing G28 Engine Speed Sensor on Common Rail (CBEA CJAA) There have been a few threads asking about the G28 sensor on the common-rail cars but there wasn't really any straightforward information about it. I just had to replace one on a 2010 and thought I'd share my experience. Sensor Location The sensor is actually bolted on to the rear ...

May 21, 2009 · This TSB will fix the 04 BEW hard start issue. I was getting a "16705 - Engine Speed Sensor (G28): Implausible Signal" code almost all the time. I would clear it and it would come right back within a day or so. I was also getting a large cloud of smoke when starting when cold along with a rough...

May 10, 2009 · Just for the record, I had crank sensor (G28) failing with trouble inside the wiring with zero visual wear in the wire. The problem was easy to confirm: twisting/pulling the G28 wiring near the sensor stalled the engine while the engine was idling. An OEM replacement part cost 45 euros and took around 15 minutes to replace on a parking lot.

Apr 29, 2017 · The G28 is the crankshaft speed sensor, located between the oil cooler and the transmission. Afaik it reads engine speed (ie tacho) using a small magnet attached to the sensor that can give off false readings if there's metal or a thick layer of sludge on it's face (the one that points towards the crankshaft).

Dec 27, 2007 · I'm a little disappointed that I didn't get the old part returned, but mostly glad the car is running again. I received a note from 1stvwparts.com that the sensor for a G28 code would be the impulse sendor, part number 038-907-319E, from ETKA, in case anyone wanted to know.

It's a VW transporter 2004 with a 2.5tdi with 128kw thanks in advance. Got a pic of a car, not mine. I just want to now were the sensor is located on my car, my engine. It's a VW transporter 2004 with a 2.5tdi with 128kw thanks in advance

Jun 15, 2020 · There are a bunch of facts that I will omit for this post. I have a specific question about the G28 engine speed sensor. The car is had been throwing an "implausible signal" code on the camshaft position sensor, but now it is showing 16705 - Engine Speed Sensor (G28) P0321 - 000 - Implausible Signal - MIL ON. My mechanic had the car for a while ...

Jul 26, 2016 · OK, check codes with a VAG program , code 18072 ( injector ciruit ) and then there is a 128.0 as #1,2,3 & 4 injector status, we were getting 273 rpm,s from the crank sensor ( G28 ) So the problem seems to be with the injector wiring or ECU ?? So I pulled the valve cover and checked all injector head harness wire leads for continuity , all seem ok.

VW Mechanic: Martin Hi, Martin here I did some scrambling around on the internet to see more on the g 28 switch only to find that the car has two switches one is the recounter on the crank shaft and the one you are talking about is the camshaft positioning sensor.

2 Faults Found: 19463 - Camshaft Position Sensor (G40) P3007 - 000 - No Signal Freeze Frame: RPM: 168 /min Torque: 142.0 Nm