Apr 18, 2014 · On some eMMC pinouts i see vcc, vccq and also 3.3V (as an example i have put the pinout of the N8000 to the attachment) My question is: from adapter pin 1.8V to which pin of vcc, vccq and 3.3V i shall solder? the same question with adapter pin 2.8V. or is it: 1.8V = vccq 2.8V = vcc? = 3.3V i hope to get an answer as soon as possible, br

Feb 1, 2019 · So I wanted to use ISP to check that eMMC was working.But I could not identified it( via check eMMC button).So I measured Vcc and Vccq and there was a problem with Vccq voltage. I thought that Vccq was there for a very, very short time so that I was not so quick to measure that voltage.

Jan 26, 2021 · Seeing the pinout of the EASY JTAG BOX, so as to understand the pin allocation of the pin port of my module, i am confused about where i should connect the VCCQ signal. There, all pins marked with yellow,are presented as VDD (pinout pic from easy-jtag website).If I have VCC of 3.3V and VCCQ of 1.8V, where am I supposed to connect the VCCQ on my ...

Nov 27, 2018 · eMMC controler is easy to communicate, only need two supplies of VCC and VCCQ, VSS ( GND ), and CLK, CMD, the HOST can access NAND use 8 bit data ways ( dat0 - dat7 ) the HOST need to have NAND access to RUN the mobile phones hardware, to run basaeband / modem part and app part, all of operating …

Apr 18, 2016 · You can use external power supply for both vcc and vccq but make sure "negative ground" is connected to negative ground of phone and atf box. Sent from my SAMSUNG-SGH-I317 using Tapatalk 04-18-2016, 20:07

Jan 24, 2018 · 1.8 to VCC 2.8 to VCCQ & 100 oms registens Vcc to cmd & vcc do d0 Sent from my MI MAX 2 using Tapatalk.

Nov 17, 2019 · oppo a5 2020 pinout nedded with vcc or vccq anyone have oppo cph1931 full pinout need some urgent oppo a5 2020 pinout needed with vcc or vccq - GSM-Forum Welcome to the GSM-Forum forums.

Jul 4, 2020 · To day i made a stupid mistake with Oppo a3s Cph1803 it was with password i soldered the isp pinout in emmc hw tool my mistake was i soldered vcc in vccq and vccq in vcc. Now unfortunatly the device i completly dead no power …

Jan 16, 2017 · in medusa pro the power voltage for VCC and VCCQ : VCC - power of NAND memory inside eMMC (can be 2.8 - 3.3V) VCCQ - power of internal emmc controller. (can be 1.8 - 2.8V) (need setup vccq in sw same with real voltage) medusa pro support the power voltage to maximum : VCC MAX =3.3v VCCQ MAX = 2.8V its supported without power adapter ?

Aug 24, 2016 · ican,t use easy jtag new adapter . cmd ,clk,do, have in adapter.but i can,t see 1.8v and 2.8v in new adapter pls help me easy jtag supporter how to