知乎，中文互联网高质量的问答社区和创作者聚集的原创内容平台，于 2011 年 1 月正式上线，以「让人们更好的分享知识、经验和见解，找到自己的解答」为品牌使命。知乎凭借认真、专业、友善的社区氛围、独特的产品机制以及结构化和易获得的优质内容，聚集了中文互联网科技、商业、 …

UTP is a general-purpose/universal cable that can be used for, among other things, T1 lines, Ethernet, and serial communications (read: Junos serial console cabling). Ethernet merely uses most/all of those pairs in the 4-pair (regular/poe), other technologies may not use all of the unshielded, twisted, pairs available in your standard UTP cable ...

Jan 12, 2017 · UTP cables used in the 586 standard inherited their color code from the 25 pair color code developed by AT&T for cabling used in telecommunication purposes. The following table shows the combination of colors to be used for each pair. This gives us this set of combinations: UTP cabling simply used the first four combinations.

The cable category speeds are not calculated the way you seem to think. Remember that the whole world isn't ethernet, and UTP cables are used for many different things. The physical cable bandwidth is measured in Hertz (cycles per second), but the bandwidth of a protocol that runs on a cable is measured in bits per second.

I am asking this because after doing some research I found some conflicting information. First, on Wikipedia page on Ethernet physical layer I found that the voltage on the lines is 2.5V. https://en.

Mar 19, 2019 · That would not be called an ethernet cable, it is UTP cable, and it can be used for ethernet, token ring, POTS, serial, etc. Ethernet runs on a variety of media, including coax, twisted-pair, optical fiber, etc. The standard to which you refer doesn't recognize things like ethernet, only the cable specifications, which when met will allow all ...

Oct 1, 2016 · I was wondering what the preferred method is for 'butt'splicing together two pieces of <100m UTP cable - or if that is discouraged in general. Relaying the cable is not possible, but it does need to be redirected from a certain point on. I know that for other cables IDC gel crimps are useful, but they usually only seem to exist for up to four ...

The advantage is the ability to work on UTP copper runs of roughly 1 to 5 km. You could also use another kind of Ethernet Cable Extender, I googled one up to 100 Mbit. Ugly Russian solution: Use old 3COM switches (without MDII-MDX auto-sensing) it has a reputation of high sensitive/high power device.

Nov 27, 2016 · A patch cable can be either UTP copper, fiber, or something else, depending on the cable infrastructure used. For instance, a Category-6 cable cannot be used when the equipment to which you are trying to connect has fiber transceivers.

Oct 20, 2018 · I think you're all talking about two different things. There's ripcord and strength yarn. The Kevlar or nylon stands that surround the pairs can be used to strip the jacket, but are there to ensure that the whole assembly can withstand the specified 100lbs of pulling force without breaking.