Jun 27, 2022 · TJI JOIST SPECIFIER’S GUIDE – USA – TJ-4000 Featuring Trus Joist TJI Joists for Floor and Roof Applications. ALLOWABLE HOLES FOR TRUS JOIST PRODUCTS – TJ-9015 A large document with drawings and guidelines for sizing and locating holes. Tip: print this out and post it on your job site for your crew and subs to refer to.

Dec 30, 2008 · I have done a lot of framing over the years, and have never used floor trusses. Now, TJI's, that is a different story. I would build with them in a heartbeat. My boss, built his house with 12" tji instead of 9.5 and loves the stiffness of the floor. In otherwords, designed for the 9.5 and substituted the 12".

Jun 18, 2006 · The architect had specified 9 1/2″ TJI to span the addition (it’s approx. 37′ long and 25′ wide. Joists are running parallel to the 37′ run). Anyway, my question is, in the plans, they spec out TJI, but in the “first page” of the architect’s stuff, it says they can use I-Joist or Trus-Joist.

Jan 20, 2006 · In a couple of weeks, I’m going to have to make a decision on our current project (new construction) to possibly substitute the specified 2×12 rafters with 12″ 560 series TJI rafters. Since the rest of the house (floor frames, girders, etc), except for the 2×6 and 2×4 fir stud walls (interior and exterior), is made up of structural ...

May 28, 1999 · *I have used TJI's in the past and have really enjoyed using them, upfront they are about 10-15% more than 2x lumber, but they do go in alot quicker using 19.3" centers. And most of all you cant beat the consistency of engineered lumber, TJI's make for a beautiful subfloor.

Jan 18, 1999 · Use hangers when attaching at 90 degrees. For the TJI that the hanger is hung on, fill the web cavity with a piece of plywood that will sit flush with the flange. Throw a generous bead of adhesive into the hanger before you drop the TJI to be hung into it. Anti-squeek medicine. There are some specifics when working with TJI's.

The floor system is comprised of Weyerhaeuser’s TJI joists, Microllam LVLs for ledgers, Timberstrand LSL Rim Board, and Huber’s Advantech flooring. Microllams are used where joist hangers are needed to support the TJIs and the LSL rim board is used along the parallel walls.

Nov 2, 2007 · Cantilevering TJI joists. fly840 | Posted in Construction Techniques on November 2, 2007 04:01am I have ...

Jun 12, 1999 · Help, please, from folks who have used TJI's in floors. My builder has never used (and I suspect he is reluctant to start using). He says the trunk for the HVAC ducts would have to go under the TJI's, and that it has to go down the center of the basement. This would make the basement ceiling very low unless we take the foundation blocks up to 10'.

Jan 27, 2009 · The TJI's are spaning 20', overall 40' front to back. The second floor will have a w12x50 at the center to carry floor load, 2nd floor is about 48'x40' we will be supporting the 2nd floor beam with 4 columns, they will not stack over the columns supporting the 1st floor steel (w12x136), which are sitting on 68"x68"x16"footings.