The confirmation of phase composition and lattice parameters were further analyzed by energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction spectroscopy (XRD).

... crystallinity of the prepared electrodes was investigated using X-ray diffraction (XRD) analysis performed in the 2θ range from 20 to 90°. Figure 3 shows the XRD results of SUS, S-SUS,...

The phase transformation was characterized by x-ray diffraction (XRD) and saturation magnetization (M s) measurement.

The X-ray diffraction (XRD), the scanning electron microscopy (SEM), optical microscope and a micro-Vickers hardness tester (MVK-E3, Akashi) were separately used to get the surface residual stresses, fracture surface after fatigue

The crystallographic structure of the electrodeposited Ni-13.4Cr-11.6P alloy coating was investigated using X-ray diffraction (XRD, Rigaku RINT 2200 VF, Tokyo, Japan) analysis at 40 kV and 20 mA with Cu kα radiation at a scan rate of 0.02 °/s in the 2θ range of 20–80°. For XRD analysis, the alloy coating was electrodeposited on a Cu plate ...

Jun 17, 2004 · Surface analyses of obtained specimens were performed by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analyses. Furthermore, the thickness and hardness of the nitrided layer were measured by scanning electron microscopy (SEM) and a micro-Vickers hardness tester, respectively.

室設置型XRD装置でも従来放射光XRDで測定してきたような高速の in situ分析が可能になってきている。本報告では実験室設置型のXRD装 置を用いた鉄鋼材料のin situ評価について紹介する。 A 第1図 2次元検出器搭載X線回折装置 主要部位 仕様・構成 特 徴

出硬化系ステンレス鋼の高強度化メカニズムを理解する必要がある。本課題では、X線吸収微細構造 (XAFS) 法、X線光電子分光法 (XPS) およびX線回折法 (XRD) 等を駆使し、SUS630 析出硬化系ステンレス鋼中のバ. ルクfcc-Cuナノ粒子の構造および電子状態を観測する事を目的とした。結果として、SUS630. . 出硬化現象に�. 料を基本としたグリーンエネルギー革命が加速化してきている [1]。トヨタ自動車の水素燃料電�. 車(MIRAI) や家庭用発電機エネファームはその先 …

of stainless steels by using XRD line-profile analysis Tomoaki KATO a, Shigeo SATO a＊, Yoichi SAITO b, Hidekazu TODOROKI b and Shigeru SUZUKI c a Graduate School of Science and Engineering, Ibaraki University 4-12-1, Nakanarusawa, Hitachi, Ibaraki 316-8511, Japan b Nippon Yakin Kogyo Co., Ltd.

Thick oxide scales of SUS 430 were peeled off from the oxidised sample and ground to powder for the phase identification using X-ray diffraction (XRD). The thin and adherent oxide scale formed on the specimen was surface scanned by XRD.