In host2 I added default route for dev ppp0 using gw 10.100.0.2, which is that ip of host1. Any suggestion? I am really not used to networking techniques. I think the most important remarks …

pppd uses a default for "hisaddr" if it doesn't receive remote address info from the peer during IPCP. The address pppd uses is 0x0a404040 + unit where unit is the 0 in ppp0. That typically …

Eddy, thanks for the help to this point! tcpdump -n ip host 208.85.40.20 -i eth0 captures ping request/replys before touching the route table. Then after doing "route add 208.85.40.20 dev …

# This script is called with the following arguments: # Arg Name Example # $1 Interface name ppp0 # $2 The tty ttyS1 # $3 The link speed 38400 # $4 Local IP number 12.34.56.78 # $5 …

ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1410 inet MY_VPN_GATEWAY netmask 255.255.255.255 destination MY_VPN_DEST ppp txqueuelen …

Mar 24, 2016 · iptables -t nat -A PREROUTING -p tcp -i ppp0 --dport 8001 -j DNAT --to-destination 192.168.1.200:8080 iptables -A FORWARD -p tcp -d 192.168.1.200 --dport 8080 …

Jul 25, 2020 · The problem is when the main server switches off for any reason and disconnects from the both connections at a same time and re-establishes the connections, as ppp0 and …

Oct 7, 2020 · auto ppp0 iface ppp0 inet wvdial up ip route add default dev ppp0 as the above interface configuration does not activate the interface at boot, i added this to /etc/rc.local -> …

I am doing this because I wanted to setup a VPN server and access that VPN using my cellphone. (My laptop and my cellphone share the same wifi). Initially, when I followed the instructions @ …

Nov 25, 2020 · First you have to ensure, that the PI is using the 3g ppp0 connection for outgoing packets. ip route Should output something like: default via XXXXXX dev ppp0 Also, doing that …