Oct 23, 2020 · Test all stop buttons in the pit to verify that with any individual stop button engaged the alarm will silence. When all stop buttons are dis-engaged the alarm should sound.

These Pit Stop Switches should be used in every pit area where water is present or may be present, including incidental water such as from mopping or water from boots, shoes, etc. …

Red Run/Stop control switch conforms to Rule 210.2e(4). Switch guard prevents damage or accidental switching. PIT SWITCHES. Model PS2 • Steel, zinc plated, box, cover and guard • …

Pit switch designed to meet ANSI A17.1 Rules 106.1f and 210.2e/2g Elevator Safety Code Requirements. Red run/stop control switch conforms to Rule 210.2e(4).

NEMA 4/12 & 4X - Pit, Hoistway, Car Top, Cab Lighting Accessories Designed and Manufactured For Water, Dust and Corrosion Protection

The PitSafe® combines activating the pit lighting and elevator pit stop switch simultaneously virtually eliminating entry into the elevator pit without taking the elevator out of service. Safety …

Sep 18, 2020 · Listed below are the suggested parts to have on hand for this PUI. This material will cover 4 standard pits and 1 walk in pit corrections if needed. All parts are lined up at OSC, …

Jul 11, 2015 · “In elevators where access to the pit is through the lowest landing hoistway door, a stop switch shall be located approximately 18” above the floor level of the landing, within reach …

Product Description. en: ASSEMBLY, PIT STOP SW/SOH; fr: BOITIER FOND FOSSE STOP + PRISE; zh: en:底坑急停装置 SW/SOH; ca: PIT, STOP SWITCH, SOCKT O/L