
My DIY NAS - Intel N100 based - openmediavault
Feb 7, 2024 · -Case: Jonsbo N2-Ram: DDR5 16 Gb-Disk: nvm 512 Gb-Disk: Raid 5 (3x 6 Tb Ironwolf )-Psu: APEVIA SFX-AP400W. In beginin i not will build virtual machines, only file server, babckup emby, vpn access and pihole only for 2 people.
Booting from GRUB to an endless loop after OMV7 installation …
Mar 1, 2025 · I installed the latest OMV7 (openmediavault_7.4.17-amd64.iso) but after it was telling "done and now do your 1st OS boot" the GRUB bootloader was showing up and afterwards an endless loop of CLI outputs with fatal and non fatal errors. The keyboard is not reacting and my rooter is not seeing the NAS PC (DHCP in use), i.e. I have to make a ...
Replacing stock OS on QNAP/Synology/etc. amd64 machines
Dec 30, 2024 · The NAS runs 24/7 and also acts as my home server, but the data is only accessed during the day. I therefore wanted the operating system and the data to run on different discs. The changeover went smoothly. Just like you would set up OMV on a PC. I gave the TS 251D an SSD, which went through the PCI slot. OMV was installed on it.
Dell Optiplex FX160 Thin Client - My NAS Build - openmediavault
Aug 10, 2015 · Personally I would recommend you the DIY way, specially because you can reuse relatively old hardware. I do find it more interesting. The OS that I am using is OMV (that's why we are on this Forum!). I discarded FreeNas because of the file system they use and the high system specification they ask for. Never used Nas4Free. Tried also Amahi.
My silent NAS / homeserver build (Jonsbo N2, N100, mostly SSD)
Mar 5, 2024 · I've had the plan to replace the 2-bay Qnap NAS and my HomeAssistant-and-other-stuff-serving Raspberry Pi 4 for a while now, and finally decided to act on it. After some research, here's what I came up with for the new NAS-and-homeserver-build of 2024: - Jonsbo N2 ITX case - Asus Prime N100I-D D4 mainboard with the Intel N100 CPU and passive ...
Why I chose an N100 over a Raspberry PI5 - openmediavault
Nov 17, 2023 · Already running ARM on the desktop I also really wanted to do the same for my home NAS. I did not consider the Pi at all though but got pretty much fixated on the rk3588 SOC as it provides far better IO: A combo PCIe 2x1 or S-ATA port, a …
How to upgrade NAS OS Hard Drive to an SSD - openmediavault
Aug 17, 2016 · Hello guys, I would like to upgrade NAS OS (OMV 2.2.5) hard drive to an SSD. I don`t want to install OMV again. Could you please tell me how to clone/copy everything (configuration etc.) from old OS hard drive to the new SSD? Best Regards.
Boot Drive size 'min. 4 GiB capacity (but more than the capacity of …
Sep 19, 2023 · I bought a 120GB SSD, because I thought that would certainly suffice for any NAS OS. Now I read that the size should be 'more than the capacity of the RAM'. I currently only have 64GB of RAM, but my server has 12 slots and maxes out at 1.5TB RAM. RAM is not that expensive and if it improves my performance, I may add more RAM in the future.
full OS disk - General - openmediavault
Jun 16, 2024 · Hello all. I discovered today that my OS disk is full. I jumped on to Google to try get a solution for it. I got so far that I tried to clear my docker images and gained 1.5 GB free storage and access to my webGUI.
Newly created NFS share aren't exported from OMV
Nov 19, 2023 · Hi there, as part of my OMV configuration, I routinely use NFS sharing between servers, mainly because it has less overhead or authentications issues than SMB or AFP. My OMV is a stock configuration for a single-drive system (OS and data on the same…