“The EMQB considered the results of both tests and has affirmed an acceptable safety margin of ≥40°C over the typical IMX-101 processing temperature...” “The EMQB Explosives Subcommittee concurs that IMX-101 is safe to handle, process, and load in …

Mar 23, 2018 · On the NXP EVK, which we have, the iMX8M in the "VO" package (with a metal lid) is assembled and a mysterious " MBF25004" heat sink is used. In the current iMX8M …

Once heat is generated, the job then becomes to transfer it effectively by providing an efficient path from the device to the environment via thermal pads, epoxy or any method that makes use of conduction, convection, or facilitates radiation. The general …

The granular IMX-104 critical temperature is 137.8°C. For comparison, the regular flake IMX-104 critical temperature is 164.33°C and therefore passed the criteria.

Scranton Army Ammunition Plant conducted a prototype forge operations in Aug 2010. Description: The burning base Burn will conduct heat through the projectile body into IMX-101 HE. IMX-101 has a lower critical temperature than TNT. Mitigation Approach: Heat transfer model had been conducted.

All the i.MX6 series application processors use the same temperature sensor module (TempMon). The TempMon implements a temperature sensor conversion function based on a temperature dependent voltage to time conversion. The main purpose of the TempMon is to guard the processor against overheating.

Depending on the processor operational mode, running software, environmental conditions, the i.MX 8M SOM may require special thermal management. Largely, this depends on the power consumption of the i.MX 8M device.

Oct 4, 2017 · You may use a heatsink on the i.MX6UL but it’s not strictly necessary. I would recommend looking at the i.MX 6 Series Thermal Management Guidelines (Application Note 4579, link below) for more information on thermal management.

Feb 12, 2018 · The decomposition time of RDX and AP in the IMX was confirmed by TG–FTIR–MS. Regardless of the SiO 2 /AP ratio, the decomposition heat of the IMX reached maximum when the mass ratio of SiO 2 /RDX was around 0.1.

Apr 29, 2021 · We have received many requests about temperature monitoring on our NXP i.MX based Nitrogen platforms.This blog post aims to answer the most common questions and help you get the most out of your Nitrogen device.