Apr 28, 2014 · The lowers wouldn't swap between a 46 and 48, but they are a cheap, readily available fork on the used market, and are very adjustable. The wheel options would be pretty much, cast 17s or anything you can spoke to a YZ, Husky, Honda, etc, front rim.

Mar 12, 2016 · I just did a valve clearance check and adjustment on my '15 FE 501 Husky on this past Sunday. The valve clearance on it is supposed to be .10mm to .15mm on the Intakes and is .12mm to .17mm on the Exhausts valves. Both the intakes were fine at .12mm and .13mm. So I left them alone.

Sep 4, 2017 · Hey guys, this is my first post! (Not my first husky)Got an 81 430CR in boxes a year back. Got it all together and runs well for the most part. I have a few questions hopefully some insight from experienced techs. 1.Runs clean and starts …

Husqvarna motorcycles

Mar 23, 2010 · Carb = PWK38AS (Motosportz Husky 125 kit) Pipe & Silencer = Stock pipe, OEM Euro3 Enduro no SA Other engine mods = Stock Premix ratio & fuel type = 40:1 Spectro Synthetic Temperature range (deg F) = 35-65F Elevation (feet) = 1000-2000 Main jet = 178 Pilot jet = 45 Needle = JD Blue Clip position = 3rd (middle) Air screw setting = 1.5-2 Slide = 7

Apr 26, 2010 · Northern Husky Husqvarna AA Class. Apr 29, 2010 #12 Rathers;93611 said: My forks are 83. I think the ...

Jun 9, 2009 · 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014 TE = 4st Enduro & TC = 4st Cross

Nov 7, 2013 · I believe athena makes a gasket kit for the huskys. I've found it easier to buy gaskets through husky dealers. As far as a performance standpoint, I doubt it on the reeds. You might get a bit more top end. However, I liked the adjustability of the vforce 2 system. Having the brackets flipped for more bottom/mid made a decent difference.

Dec 19, 2017 · Husky/KTM is also one of the few manufactures that offer different base gasket thickness, which means that once the squish is set that it is importance to always use the same thickness base gasket. Ideally this is set before hand with the proper setup having the piston align with the bottom of the exhaust port at BDC and the top of the cylinder ...

Nov 8, 2011 · Just powered up my 2008 te 250 to a 310 with new ecu. The neutral light flashes, but everything else seems great. Does it matter if the light flashes? Is the ecu affected or something?