Sep 17, 2013 · Our New Haas ST-10 Hello All, This will be an ongoing post meant to chronicle the good, the bad, and the ugly of our Haas ST-10 purchase. Our old Hyundai Hit8s was great, but it broke again and the service cost predictions were $5K and up so we decided on new. We know all about the Haas being...

Nov 7, 2010 · I'm currently running a 1994 Hyundai HiT 8S and thinking of replacing it with a new Haas ST-10. My garage is my shop and has limited space and power (running a from a phase converter) so machines much bigger, heavier, or more powerful than these are out of the question for me. I mainly run...

Dec 2, 2016 · We use half-inch blocks for setting tools on both mill and lathe (and 123 blocks to verify the offsets, but a 123 block would work for setting too). I'd be curious as to why you prefer using a tiny shim, if you have a particular reason behind it. I don't like using shim stock or paper on anything because the students forget to change the …

Feb 19, 2004 · Yup! You're missing the Company Directive at Haas, which clearly states that all engineering improvements on any model of Haas machines MUST BE accompanied by another engineering change, which must decrease the ability to maintain the coolant system. The SL10 was a disaster, sounds like the ST is a little worse. The Minilathe requires the employment of a midget or a small chield to crawl 5 ...

Nov 28, 2016 · I don't know much about lathes and I'm a mill shop but I don't want turn customers away and have them going to shop around and lose them altogether so I'm considering a TL-1. After pricing out a TL-1 with options its so close to a bare bones ST-10 which offers way more. Initially I just need...

Feb 15, 2025 · Hi everyone, I'm looking for some advice. I purchased this haas used from a school a number of years ago. It had very few hours and no crashes I was told...

Jun 29, 2013 · Nothing wrong with Haas lathes. I turn hardened steel with CBN on a Haas Toolroom lathe. The ST-10 is a capable machine and would likely be well suited for your applications. They're not as heavily built as some others, but it doesn't really matter for turning plastics and the Haas control is much nicer to use than a Fanuc 0i-TC.

Nov 25, 2009 · I am attempting to install a manual 4 jaw chuck on a new ST-10. Does anyone have a walk through/assembly/ help on doing this. I watched the chuck installation video and pulling the chuck was straight forward enough. The problem now is that I am hitting the draw tube when i go to install the...

Dec 19, 2016 · I am pulling my hair out trying to get this thing to work, i am not tapping deep in my opinion, and it will sorta work when i go to a depth of about 0.1 - 0.2" but when i go full depth i keep breaking taps. I believe my tap is well aligned, but i am not 100% Background/data MAchine:Haas ST-10...

Jan 12, 2015 · The Haas OD blocks x offset should be stored in the parameters/settings somewhere. When you push x axis to centerline (iirc) button in the offsets page it enters the number from the parameters.