Just make sure you get one over-rated for the guy wire you are tensioning (400 pounds for 3/16" EHS and 700 pounds for 1/4" EHS). I believe the one I use has webbing about 1" wide. I forget …

EHS guy wire has a different twist than wire rope, and requires preforms made for that specific type of wire. Using Rohn's guy assemblies (not torque arms) allows a secure attachment for …

To tighten the guys, I use a preform about 6' up each guy wire and a come along attached to the preform (lever end of come-along). The cable end of the come-along hooks at a convenient …

When tilted over, the yagi hung over the gable end of the garage and was easily accessed in the driveway. I would easily manually tilt the mast up, grab the backstay guy wire, walk it out to the …

K9KJM Rating: 2007-06-04; Good Product Time Owned: more than 12 months. Phillystran is indeed a good product, And really not any more expensive than using egg insulators to break …

All the parts were there and fit correctly (with a little tweaking). The antenna is mounted on a 16ft 2" galvanized pipe attached to a the factory tilt base assembly. The tilt base is mounted to a …

C. Site Location. These antennas need to be as far as possible from any surrounding metal objects. Our tests, and those of customers, show that any antenna wire should be at least 15 …

The guy rings are thick aluminum with a heavy plastic insert to allow the tubing to rotate. My application is 33' snap mast (guyed by 1/4" dacron ropes) supported by a Glen Martin 4-foot …

But the fan dipole was better!! look columbia 59, 599 zl/zs9hi /mm going to heard island, 3b8 599 4s7 599,zs6 59+10,cn8 59+ The Fan dipole, loop antenna, long wire, everything we put up …

Each pole has a pulley on the top, that sustains the guy wire). With no guy wires, the antenna would look really ugly. - SWR performance: While the PRO-67-B was immediately OK with no …