All this electronics are into a enclosure with proper forced ventilation, but we need to install a reset switch for the MKS board, so the user haven't direct access to the boards. There is a EXP2 header with RESET (8) and GND(8) pins.

Jul 22, 2024 · eXP2 Series User Manual. Document ID : 2990. SITE : en. 문서유형 : MANUAL. Update Time : 2024-07-22T05:50:37.146+00:00. Product. eXP2 . Content. Chapter 1 General Introduction Chapter 2 System Configuration Chapter 3 Standard Specification Chapter 4 …

Dec 9, 2021 · I'm switching for 2x SKR 1.3 to 1 Octopus v1.1 and klipper but if I connect or as soon as I connect exp2 the octopus board resets. the board also won't come up with EXP2 connected at all. This was working with the 2 SKR v1.3.

The “Reset USB Power” option is an additional function to improve the initialization of the storage device with slow recognition speed or low recognition ratio. Depending on the characteristics of the storage device, however, the power initialization can be an obstacle to the initialization work.

eXP2 Series. More Convenient Control User-oriented interface, more powerful performance, fast screen changes and high levels of responsiveness.

Oct 5, 2020 · I'm going to install an external reset button, as my display does not have one. Do I need to pull the EXP2 RESET pin to GND or 5V? Thanks!

Sep 14, 2022 · Hi, You were right. After some testing, I've confirmed that I had my cable incorrectly wired. After wiring EXP2 correctly both the reset button and rotary knob were working. Thank you, Gonçalo Farias …

Dec 12, 2023 · Update.....so I did a factory reset and restore. Even worse now, exp2 volume all over the place. If I unplug the expression pedal then it's back to normal and can control the delay mix but toe tapping exp1 to adjust exp2.

Nov 25, 2018 · Tap FS3 until the display shows "EXP1 Active!" Now you can reset FS3 back to whatever you had before (TAP / TUNER etc) and both expression inputs work. I was having a similar issue. Both expression inputs were controlling EXP2. In my case it was tied to the EXP1 / EXP2 toggle setting.

Mar 24, 2022 · Press the toe switch (push down hard on the front tip of the pedal until you hear a click). This action toggles between EXP1 and EXP2. If it doesn’t work, make sure the wah and volume blocks are correctly assigned to EXP1 and EXP2 in your preset settings.