Oct 9, 2017 · Does anyone know if camber can be adjusted as is? If not, has anyone installed camber kit on OB Gen 5? I'd like to change the camber to -0.5 deg or so. I'm assuming that, …

Mar 4, 2024 · To adjust the camber on a Subaru, the process can vary depending on the specific model and year. Here are some general guidelines: 1. Front Camber Adjustment: Some …

Oct 27, 2021 · Subaru’s have “camber pins” installed on the front wheels at the factory so that front camber is fully adjustable. Subaru’s DO NOT have camber pins installed in the rear and …

Oct 27, 2022 · You can install a camber pin (about $20 for the part) and it should bring it back into specifications. Subaru is one of the few manufacturers to install camber pins in the front …

May 27, 2023 · One idea is to adjust the R camber bolt to be at the symmetrical position as the L. The bolts appear to have "clock" markings around the top half of their flanges. If the L is set at …

Dec 18, 2004 · The goal of having a large neg. camber is that when the weights shifts onto the wheel, the tire would be close to parallel to the road surface (even though when standing still, …

Oct 14, 2020 · After looking up general alignment information, it looks like a case of negative camber where the tops of the tires lean inward, putting stress on the inside edges of the front …

Apr 23, 2009 · Here's a great tip guys to check if your camber bolts (or any other) are slipping or coming lose. Tighten then up, then take a permanent marker and draw a line from the bolt …

Jan 23, 2014 · My 2002 has something bent in the rear and is causing a lot of negative camber. I have seen the bolts you can get to provide some adjustment. However I would like to fix the …

May 29, 2024 · However, the right rear Camber is -0.7 degrees (within spec and green), which means it is significantly different from the opposite end (a diff of 1.4 degrees).