Jul 21, 2016 · In Linux, I often find myself needing to reference the output of lsblk and blkid, but I don't see any equivalent commands in FreeBSD. I'm planning to make a second attempt at converting my server to FreeBSD, and I'm just trying to make sure I'm not losing any functionality, or at least that I have acceptable alternatives.

Aug 6, 2014 · The blkid program is the command-line interface to working with the libblkid(3) library. It can determine ...

Aug 4, 2017 · blkid/blkid.h: No such file or directory: sundanat: Linux - Hardware: 4: 05-24-2015 07:20 AM: Can two different device drivers use the same low level bus driver? anuragccsu: Linux - Embedded & Single-board computer: 1: 04-28-2011 02:08 PM [SOLVED] How to mount by-uuid if the device won't show in /dev/disk/by-uuid untill after blkid /dev/sd ...

Nov 1, 2011 · blkid shows you what type of device the block device (e.g. swap, filesystem) so unless you had formatted all of /dev/sda to be a filesystem or swap device it won't show you /dev/sda. It will show you partitions of sda (e.g. /dev/sda1, /dev/sda2) if you have made any of those and they are formatted to be swap or filesystem.

If so, then the boot loader is probably isolinux which includes a minimal busybox in the minirt (only enough for booting and troubleshooting at that stage), along with some version of blkid but evidently not the busybox version.

When looking at fdisk, I did notice that /dev/nvme1n1 (data) shows the GPT table is corrupt and only the backup is working... Is it possible that the corruption breaks the kernel so the other disk won't appear... nvme0n1 is listed after nvme1n1 for …

Jul 6, 2023 · Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here!

In case it wasn't clear this is a software raid setup. The supposed missing disk is the root partition in the array. All disks for the array show up in blkid and the drives/volumes show clean and intact according to mdraid. I am still stumped on this and welcome …

Dec 12, 2016 · blkid not seeing the data is a symptom - the problem is that the luks container hasn't been opened. Excuse me, but the LUKS header itself has a UUID and type that will be seen and reported by blkid :

Nov 13, 2023 · - for quick interactive overview there is command lsblk, which is more suitable than blkid (rather aimed for probing of devices and querying of its specific attributes) - lsblk -o +PARTLABEL will show you all devices in tree structure including partitions and its labels (you can make an alias for that) 2. Filesystem labels