The ArcVera high-resolution mesoscale-modeling system is applied for the main purpose of increasing wind-energy project value; the modeling system achieves this by creating high-fidelity long‐term average annual hub‐height wind-speed maps and turbine‐by‐turbine hub‐height wind-speed estimates.

Web site of the NWS Aviation Weather Center, delivering consistent, timely and accurate weather information for the world airspace system

Sep 19, 2023 · What you are looking at is a soffit. In ASCE 7-10 Figs. 30.7-2 & 30.10-1, soffit pressure is the same as adjacent wall. I would only use overhang pressures if the member has wind acting on both the top and bottom.

Wind gusts are coded in two or three digits immediately following the wind speed. Wind gusts are coded in whole knots using the units, tens, and, when appropriate, the hundreds digit. For example, a wind out of the west at 20 kt with gusts to 35 kt would be coded 27020G35KT.

FAA air traffic facilities are required to solicit PIREP s when the following conditions are reported or forecast: ceilings at or below 5,000 feet; visibility at or below 5 miles (surface or aloft); thunderstorms and related phenomena; icing of light degree or greater; turbulence of moderate degree or greater; wind shear and reported or ...

Since exterior linear metal soffits are subjected to varying wind loads determined by geographical area and height above ground, the soffit system must be rigidly supported rather than suspended. Therefore, the type and spacing of the support structure requires special design.

Forecasters at the Space Meteorology Group (SMG) issue 30 to 90 minute forecasts for low cloud ceilings at TTS to support Space Shuttle landings. Mission verification statistics have shown ceilings to be the number one forecast challenge.

The following sections provide information on how Windchill Integration for MES integrates with MES, including: • Windchill ESI services • Data Exchange Between Windchill and MES systems

Windchill Integration for MES includes the following key features: • Enables Windchill MPMLink users to publish various business and manufacturing objects to distribution targets. • Supports publishing from a Windchill MPMLink instance to one or more distribution targets.

Sep 29, 2020 · Facade openings have often been used as aerodynamic measures for wind-resistant design of high-rise buildings to meet the requirement of structural safety and comfort. Obvious wind speed amplifications can also be observed inside the openings.