Oct 2, 2024 · I would like to clarify the procedure for replacing VG310. Please let me know if am missing anything from the below procedure. To configure the new gateway's IP address, we must first connect with it via the console port. Once we've gained network access to the gateway, we'll need to copy existing ...

Jul 3, 2019 · Hello, Does anyone have a simple step by step document or video link for the initial configuration of a VG310? For some reason the standard Cisco guides confuse me lol All replies rated. Thanks in advance!

Apr 13, 2023 · We recently got several VG320 and VG310 and just deployed but I see the link these hardware are expired. End-of-Sale and End-of-Life Announcement for the Cisco Voice Gateway VG320-EM and VG310-EM Are VG320-EM and VG320 are the …

Oct 6, 2016 · Hello, we're looking to replace a couple VG224s with some bad analog ports with the newer VG310 platform. I have a couple questions for anyone who has used the VG310 as a replacement for the VG224: 1) when ordering the unit, do you need to also order a PVDM3 module in order to utilize the 24 onboa...

Feb 11, 2016 · Hi, Hope you are doing good. I have a question to ask. Can you configure a Cisco voice gateway for example VG310 to allow only analog phones to communicate with each other and to the PSTN without adding CUCM or CME? Regards, Aristide

Jun 18, 2016 · I am new to VG310 hardware. I have experience with CME/SIP provider services. I was asked to setup a VG310 to a SIP provider to support faxing. Are there any available configuration examples for this? Is the programming similar to a CME enabled router? AT

Apr 28, 2022 · I have a new VG310 configured using MGCP as the protocol. Half of the FXS ports (ports 0/0/12 through 0/0/23) are configured (loop-start) and registered just fine.

Mar 21, 2019 · Hi I understand that the phones need to be registered in CUCM as and endpoint under Essentials, but does the VG310 require any CUCM licensing or any other licensing? I have a customer that believes this is so but I am doubtful Thanks

Jun 3, 2021 · Solved: Hi folks, I am planing to replace the existing VG224 by using VG310. Can i just disconnect the existing RJ21 cable and plug it to the VG310? the port on the VG224 is the same as VG310's?

Feb 26, 2020 · Hello All, I have several VG310 and VG320 in my network and I will upgrade all of them to vg3x0-universalk9-mz.SPA.159-3.M.bin - both models use the same version. I also noticed something. On Cisco Download Page, I select model and 2 options appear; 1-) IOS ROMMON Software 2-) IOS Software The...