Aug 14, 2021 · From a security perspective, keep in mind that a VLAN is just an ID added to the Ethernet frame. The “default” VLAN for a port is the VLAN tag added to untagged traffic on the port by the switch/router. You can also determine the other VLANs allowed on the port.

Sep 21, 2022 · Is VLAN 50 your management network in this scenario (i.e. is that what the switch is going to use to talk to the controller)? I ask because I remember running into a problem on my network where my Flex Minis would have issues talking to the management network if it came into them untagged on the trunk port.

May 31, 2020 · WLAN2 / VLAN 2 is my IoT for security cams, smart home devices, TVs, Firestick, Chromecast, Apple TV 192.168.2.X/24 WLAN3 / VLAN3 is my guest network. 192.168.42.X/24 EDIT: I just looked at my IoT WLAN and do have Enable …

Oct 16, 2018 · Default VLAN VLAN1 - 10.10.1.0/24, VLAN2 - 10.10.2.0/24 and VLAN3 10.10.3.0/24 were defined in the Unifi Switch. 1st issue - Unifi switch won’t allow to select “VLAN Only” in the Network section for any of the VLANS. All VLANs are set as corporate. Instructions said that VLAN should be configured as VLAN Only.

Aug 20, 2022 · This works for me, I have a TON of rules and VLANs on multiple UniFi sites: Rule 2000 - Allow all Established/Related traffic everywhere source: all networks (RFC1918). destination: all networks (RFC1918). This allows already established/related traffic to communicate Rule 200x - Allow rule for services

Jan 31, 2020 · Hello all, I’m having issues getting UniFi APs working over a VLAN. First of all, my set up is a little convoluted. I’ve got hardware from three different brands, which was not my preference… Sophos XG Firewall → Aruba 2930F Switch → UniFi PoE Switch → UniFi NanoHD Access Points Enjoy this crappy Paint diagram that poorly explains my situation: (I apologize for not using actual IP ...

Jun 22, 2022 · Here's step-by-step of what I did to achieve vlan isolation, isolating a specific vlan from all other vlans: Goto "networks", create the new network/vlan that needs isolating (in my example I created a network called "IOT Network" using 192.168.200.1/24) Goto "firewall/security", and "Create new Port and IP group"

I had configured VLAN and firewall settings by following a youtube tutorial by a very reputable contributor, but I admittedly did this without really understanding what the individual steps meant. It's a lot clearer to me now and my setup actually behaves pretty much as it should, e.g. separations between various (V)LANS, only permitting ...

Dec 28, 2023 · Configuring this is usually done for security reasons in larger networks so that you can only use the allowed/approved/native VLAN(s) for the specific switch port. Allow All = Any VLAN tag allowed Block All = No tagged VLAN traffic allowed (untagged/native VLAN permitted) Custom = Specify which VLAN tags are allowed

Dec 5, 2022 · Unifi controller installed on physical windows server & its connected on default VLAN-1 (192.168.0.1/24) AP1 connected with VLAN-10 & vlan-10 ip (192.168.1.1/24) is assigned to the AP interface, & afterwards we need to reset this AP1, We have to bring this AP to our IT office & connect this AP on VLAN-1 port so that it can be re-adopted