Mar 4, 2025 · The USB-C connector is the input port for power (works with any USB-C cable). The 2-pin screw terminal securely connects output wires to your device. Step-by-Step Process to Design the Project. The complete design process for this type-C power adapter starts from the schematic to the PCBA and the enclosure.

Using USB-C in your projects is really very simple. However, compared to the micro USB-B two resistors are needed on pins CC1 and CC2. Then just add a 1M resistor to the connector shield. Also, you just connect the following lines (Vbus, D +, D-, GND) as you usually do with the micro USB-B. You can leave all other pins unconnected.

The USB-C port voltage and current are rated up to 27.72 watts per USB-C port, its Type-A ports are QC 3.0 with up to 18W per port. We have designed this board with an Injoinic chip for Type-C USB PD charging and high demand needs.

Aug 3, 2022 · The USB-PD 60W PCBA supports 5~20V PD profiles on the Type-C Port with 60 Watt maximum output. It connects to a standard 12V automotive power input or industrial 24V power input via 2-Pin Phoenix Connector.

This High Power Dual Port USB Type-C PCBA that complies with the latest USB-C and PD standards. Intended for use in PC power adapters, mobile chargers, car chargers and power bank applications.

USB Type-C (USB-C) is a universal connection standard used for device connectivity and charging. As the latest evolution of USB interface, USB-C comes with several advantages, including reversible plug orientation, higher data transfer rates, and power output capabilities.

Apr 7, 2021 · A 15W 2-port charger with only 1 port in use can advertise 5V@3A, but once another cable gets plugged it, it can change the advertised current to [email protected]. It can do this without power interruptions, which is needed by many of the older USB standard protocols.

Feb 4, 2025 · To use SWD over USB-C, the only accessories required are a passive USB-C cable and USB-C to debugger adapter board (USBC port connected to debugger-specific connector or generic header for jumper wiring to debugger).

Jul 7, 2014 · To route D+ and D- traces on the USBC connector, you can use Serpentine Routing or differential Pair Routing. When routing USB2.0 signals, it is essential to keep the trace lengths matched, but skew matching is less critical than in USB3.0.

Mar 17, 2023 · Unless you NEED the space, or know how to and need to properly implement the connector, it is highly recommend to use a USB A receptacle, or something like this, soldered to the pcb: https://www.adafruit.com/product/5180. https://www.sparkfun.com/products/15100.