Mar 24, 2014 · Re: Harbor Freight HVLP Spray Gun Info I have 8 or so Binks spray guns, some are $300.00 for just the gun, then add the 2 qrt. and 2 gallon pressure pots. it adds up quick. …

Dec 7, 2008 · Using a spray gun, apply one half to one mil even thickness. Let dry, flash off for five minutes and apply another even coat of one half to one mil film thickness. This urethane …

Oct 20, 2010 · I sprayed my truck bed with Herculiner. Easy to spray with the included spray gun and dries to a pebbled rubber finish. It is reasonably non-slip when wet and very resistant to …

Mar 31, 2010 · 7. The type of spray gun used will determine the proper reduction ratio IMPORTANT: DO NOT use any type of aerosol spray paints, as the paint will not properly …

Dec 25, 2008 · I'm sure the Marine paint would be but nobody had it. I'll put down several coats of red oxide primer (at 29.99 per gal) then finish up with several coats of gloss black (at 27.99 per …

Oct 21, 2007 · Good old-fashioned spray-it-on-and-run oven cleaner will take aluminum back down to bare metal, removing old paint, grease, etc. Follow with a water wash, light sanding, …

Jun 2, 2011 · HINT: Using the Gloss white as a Base you can use Artist Acrylic Oil Paint to Tint the paint to ANY color you want. Thin it with the Acetone and then mix it with the white to get …

Jun 13, 2008 · If you are handy with a welder and a spray gun or paint brush, trailer fabrication is easy. If you can't do the calculations for strength, then find a friend that can or stick closely to …

May 10, 2003 · Your paper should be wet all the time , so as the sanding surface. <br />If you hear sand paper squeeck, it needs water. <br /><br />Before the second coat you need to …

Feb 28, 2011 · dupliclor is an aresol. It has the best spray nozzle and will make it easy to apply a good consistent paint spray. It is the same thing as the other one-part primers places like …