Jun 7, 2014 · But I haven't managed to find the correct size Torx screwdriver to unscrew the screws from a Seagate 2.5" HDD. A bit of searching suggests I should use a T6 Torx …

Feb 1, 2004 · If it needs to get into small spaces, forget a small electric screwdriver. Instead, look for something like this (that's just the first Google hit, and has a good pic--I am not endorsing …

Mar 25, 2003 · Ok, I try to upgrade my laptop hard drive, but first I need to remove the old drive from the drive holder. HP used four screws (+) that are really small. I have a Phillips …

May 18, 2013 · You can pick up a set of these at Walmart or a hardware store for just a few dollars. I use the largest Phillips screwdriver for most things. When I run into a stubborn screw …

Jun 23, 2004 · I have found them very useful and used them in the 3 fan swaps that i have done with the lian li pc65. Simply take a small screwdriver, and push out the shaft of the "rivot" and it …

Mar 3, 2014 · I just cut them with a single-edged razor blade (cut to beyond the barb), then use a very small flat blade screwdriver to expand the cut and break loose. Of course, this is only …

Apr 17, 2016 · Without the right tools, replacing a small surface mounted component like that can be difficult by hand. However, if you know how to solder, you can replace it with a small …

Sep 4, 2024 · You can use a small flathead screwdriver to get under the clip and raise it up too. Try pliers and grab the top of the clip with them and pull up. Wiggle back and forth if needed.

Dec 7, 2004 · /\/\/\ what should I do. Does it come with an extra jumper? It was the jumper to reset the BIOS, by the CMOS battery.

May 24, 2003 · my rigid stuff gets used at least weekly, and i try to charge one battery while im using one, so most of them sit most of the time at some mid charge state and i grab which …