Oct 27, 2013 · Hi all, I had a couple questions regarding these shotguns. I know where I can get a used but good condition Winchester SX2 for $350 or a lightly used SX3 for $750. What is the difference between these shotguns, and is the Super X3 worth 2x more than the Super X2? Also would these shotguns be an...

Sep 11, 2011 · The SX3 and Maxus are nearly identical guns, so much so that you could probably swap out parts, after having them both apart on the counter in front of me the only difference inside and out was the fore stock. the sx3 with a traditional and the maxus with the quick disconnect. really no difference in them if anyone has seen a difference in the ...

Nov 12, 2019 · The only reason I shoot an SX3 or my SXP is because with the loads I shoot, the Invector plus system beats the pants off of the Benelli/Berreta Mobil system. I'm not trying to start anything here. I've just noticed that I consistently get 10-15% better patterns with my Winchesters and Brownings with the same loads.

Dec 11, 2012 · I was having a problem with my SX3 with 3" & 2 3/4 doing the same thing as you are saying I took the recoil spring out and cleaned off the grease a other junk and so far have not had a problem Also lube the groves were the bolt runs and keep it lube really good. The rep from Win told me to do that when I called him about my problem.

Apr 28, 2013 · SX3 is only 3 years old with minimal use duck and goose hunting. The part of the magazine tube where the brass ring is located failed and has a chunk of the magazine tube missing. The gun still shoots fine as a single shot but it won't eject shells due to all of the gases coming out before the gas piston.

Jun 23, 2020 · I have a 28" SX3 and I have patterned quite a few chokes with a variety of shells. I always struggle finding a choke that will work for the closer shots and also be acceptable for a 40 yard shot. The chokes that I have done a bit of patterning with in my SX3 are Briley IC, LM, MOD, IM, Goose; Trulock mid range and long range; Muller Decoy and ...

Jun 8, 2013 · I bought an SX3 last year and shot both ducks and my deer with it. Before I shot rifled slugs through it I called Winchester and asked if it was fine and they said yes with open chokes. I used the IC factory choke. It shot fine with the slugs but about 6 inches to the left.

Aug 17, 2016 · The best choke hands down for my SX3 has been the Browning Grand Passage light mod, mod, and improved mod chokes. They are made by Briley and have given me nice even patterns out to 40 yards with a 1 1/4oz payload of #2's and 3's. These chokes seem to really work well with Kent's offerings or Hevi Steel.

Oct 31, 2017 · Hey guys. Recently picked up what appeared to be a lightly used winchester sx3 from cabelas. I have not shot it a lot, but put both some low base target loads as well as a couple types of duck load through it without a hiccup, nice shooting gun. Fast forward to today, hunting a flooded hole in a cornfield for mallards and geese.

Sep 24, 2010 · Just about every after market choke company makes chokes for the invector plus system,which is what the SX3 is.As mentioned Carlson makes good chokes.I've found that the overbore barrels on these guns requires a little tighter choke to get the patterns that I want,meaning I had to go to a Improved mod to get mod performance.You'll just have to ...