Jun 11, 2009 · Can anyone confirm the proper torque spec for a gen 2 rear axle nut? Gen 1 in this thread is listed as 47 lb-ft, and the 03 SV650 service manual seems to conflict with itself stating 72.5 lb-ft in the chart on page 2-32 and 725 lb-ft (WTF?

Jul 19, 2012 · My one (3912, published 2009) lists 65NM for the rear axle nut for all models (99 - 08). Where as the 2003 Suzuki service manual I got from ebay lists 100NM for 2003 models which matches what you posted. Looking to tighten up my chain and don't want to over do it (been there done that).

Jul 6, 2010 · To answer your specific question, the sv650 is a 650cc v-twin while the R6 is a 600cc inline 4. The dyno charts are below. The v-twin makes more torque at a lower rpm which makes it more usable.

Oct 5, 2023 · Torque is a very respectable 45 ft/lb that peaks at 6000 rpm and hold on until around 8,500 rpm where it tails off, which is typical of most L-twins. SVs tend to range from 65 to 70 hp plus at the wheels and this SV is a good one.

May 18, 2009 · Just wanted to get a thread started, to discuss horsepower and torque, and some of the most efficient (money and time - wise) means of producing more output. I encourage anyone replying with numbers, to include their dyno chart, and a list of whichever mods may be helping/hindering performance...

The Suzuki SV650 has 75.00 HP (54.7 kW)) @ 8400 RPM. How tall (seat height) is a Suzuki SV650? The Suzuki SV650 seat height is 785 mm (30.9 inches) If adjustable, lowest setting.

Torque link nut (Front and Rear) 35 3.50 25.5 Rear shock absorber mounting bolt/nut (Upper & Lower) 50 5.00 36.0 Rear cushion lever/rod mounting nut 78 7.80 56.5 Rear axle nut 65 6.50 47.0 Rear sprocket nut 60 6.00 43.5. Title: torque specs.xls Author: Li-An Created Date:

Its fuel-injected V-twin powerplant offers crisp throttle response, strong torque and a stunningly wide powerband. - Twin spark plug cylinder heads for optimum combustion and reduced emissions.

Aug 4, 2008 · Hi, i've just bought some 'dog bones' to rise the rear 35mm and would like to know what the torque settings are for the linkage bolts? Thanks for any help, mines a K5 model.

The engine looks like a miniature version of the firm's TL1000 motor, the eight-valve, quad-cam design producing an impressive 52kW (70bhp), with a pleasing, torquey delivery.