Dec 9, 2011 · Congrats on the sks! Pop the lever infront of the trigger guard back, allowing your mag to pop open. This will allow your bolt to close. or carefully push the mag follower down …

May 1, 2010 · if you cant figure it out, remove the bolt assembly and the magazine and upload some pictures of the inside the mag well-from the top and underside-on here. then upload …

Soak the bolt in the pentrating oil, and let it sit overnight. I mostly use the PB Blaster for this because it is cheap, and it works really well for this kind of thing. You will also need a sturdy …

Aug 31, 2008 · Re: sks bolt lock, won't chamber « Reply #13 on: September 03, 2008, 05:59:47 AM » Norinco is Chinese, probably the most common and probably the best to start with.

Jul 6, 2015 · Re: SKS bolt modification « Reply #9 on: July 06, 2015, 07:37:24 PM » I was implying that the fire from a blown primer melting a spring is minor compared to blowing a pin …

Sep 27, 2014 · Here's my first SKS bolt modification. Did it in the garage in about 25 minutes with the Dremel and a small "peach" colored grinding stone. It's the 932 - just looked it up. I took …

Jul 26, 2011 · Re: SKS bolt carrier keeps jamming forward while shooting « Reply #7 on: July 21, 2011, 08:46:44 PM » Use a brass 410 shotgun brush for the chamber....you will also need the …

Dec 16, 2008 · 1. Hold the SKS bolt assembly in place, and 2. Hold the socket and torx bit punch in place, AND 3. Operate the press lever. However, once you manage to accomplish those …

Sep 14, 2008 · The SKS has a bolt hold open feature which will work with the factory or Tapco mag. The "Type 84" style of detachable mag SKS had an additional manual BHO added …

Sep 27, 2014 · I would not leave the bolt open. However, I think it is nice to be able to have the SKS at the ready without being in condition 1. With the bolt closed on an empty chamber it …