Jun 1, 1998 · The SAE J2334 lab test procedure should be used when determining corrosion performance for a particular coating system, substrate, process, or design. Since it is a field-correlated test, it can be used as a validation tool as well as a development tool.

The SAE J2334 test is a cyclic salt spray test that evaluates coatings by exposing them to the aggressive conditions. During one cycle of this test, the coating experiences following conditions:

SAE J2334 is a cyclic test standard that requires the chamber to conform to SAE J1563, ASTM D 1735, and ASTM D2247. The solution for this test is comprised of .5% NaCl, .1% CaCl₂, .075% NaHCO₃, and the balance D.I. water.

Jan 19, 2024 · The SAE J2334 laboratory cyclic corrosion test is a widely recognized protocol for evaluating the corrosion resistance of automotive materials, components, and coatings. It simulates real-world exposure to various environmental conditions …

SAE J2334 is a method which specifies the test conditions that are required to perform a cyclic corrosion test that replicates, on an accelerated basis, an outdoor exposure. Actually, this protocol relies on three periodic segments: the humid, the spray application and the dry stages.

Oct 2, 2021 · ae.org/technical/standards/J2334_201604 1 Foreword—This laboratory cyclic corrosion test procedure is based on a field-correlated Design of Experiment process conducted by the SAE Automotive Corrosion and Prevention Committee (SAE/ACAP) and the Auto/Stee.

Apr 5, 2016 · The SAE J2334 lab test procedure should be used when determining corrosion performance for a particular coating system, substrate, process, or design. Since it is a field-correlated test, it can be used as a validation tool as well as a development tool.

SAE J 2334 is used widely throughout the North American automotive industry - particularly by General Motors and their suppliers. It is also used elsewhere in the world where these auto companies have satellite manufacturing facilities, or joint …

The SAE J2334 lab test procedure should be used when determining corrosion performance for a particular coating system, substrate, process, or design. Since it is a field-correlated test, it can be used as a validation tool as well as a development tool.

Assured Testing Services is capable of performing cyclic corrosion test SAE J2334, as reflected on its ISO 17025 scope. This test is comprised of alternating cycles of electrolyte (salt) exposure, a drydown phase, and a humidity exposure phase.