Jun 23, 2005 · Not sure what they'll tell you but there should be a series of numbers on the ring gear and the pinion gear that together will tell you the drive ratio of the gear set. Something …

Jun 7, 2011 · That's the ring gear part number for a RICHMOND 10 bolt (8.2") 3.55 gear set. The complete set P/N is 49-0015-1.

Jul 8, 2005 · i pulled the cover off the housing and looked at the ring gear, on the ring gear is stamped 41 10 if the chart above is what i am thinking i have a 4.10 gear with a posi , correct …

Dec 2, 2024 · Not excel but Richmond about 3 years ago. No issues, quiet gear. IIRC they are made in Italy 1967 CHEVROLET CAMARO Richmond Gear 49-0011-1 Richmond Gear Ring …

Oct 27, 2004 · From that, I know that it came from a 1967 - 69 Camaro. It is a 10 bolt, Ring Dia 8.2", Pinion Dia 1.438, Bolt Dia .375, 28 Axle Splines. On the Ring gear are the numbers: 1 …

Sep 14, 2014 · If the gear oil to breaks down, the end result will be catastrophic damage to the ring and pinion. Avoid burn outs, sudden starts and heavy acceleration for the first 500 miles. …

Dec 11, 2024 · The ring gear and carrier are a direct bolt-in swap. The hurdle is the pinion gear and prop shaft that have some design changes. The pinion gear went to a 17 spine input from …

Apr 6, 2019 · Bought a 12 bolt rear end and finally got to drain it and noticed there is rust on the posi and on several ring gear teeth. The rust on the posi is on the outer housing and it doesn't …

Jun 19, 2006 · There should be numbers stamped into the ring gear and etched on the end of the pinion. Only the stamped numbers are important in identifying who made it. If the numbers …

Jul 1, 2010 · The price quote was $350 for the ring and pinion set, plus 4 to 6 hours at $80/hour. The ring and pinion sets I have looked at included Eaton, Richmond, Randy's and others, and …