Jun 30, 2017 · In this video, I'm showing how I installed my PL-259 connector on a RG-213 (or RG-8) coaxial cable. I'm not the only one using this technic but after 25 years of hamming this …

Jun 30, 2017 · Testify! My 63-watt Hakko 456 works great for this. Ceramic heater and very large tip. Lots of latent heat for those big connectors.

Feb 19, 2004 · wind an RF Choke at the antenna end of the coax. Wind maybe 6-8 turns of RG-213 (or whatever you are using) about a foot below the dipole center insulator. If you make the …

Dec 23, 2016 · I was really wondering that same thing when I made my 1st mag loop using the shield portion of a piece RG-8 about 18 inches in length. When I made it into a loop it was …

Mar 15, 2018 · Even RG-8 size cables can suffer from a similar problem if the outer jacket material, shield and center insulator material just happen to be the wrong combination. Water …

Aug 31, 2017 · The wire used is #14 house wire for the 16-ft counterpoise and #14 copper clad iron wire for the 53-ft section. The 20-ft of feedline connected between the 1:1 Balun and the …

Sep 29, 2021 · RG-400, RG-142 and as was mentioned 303 all good for Balun building, or just get 14ga enamel magnet wire and do that. If I do use a straight dipole, I will build an UNUN …

May 16, 2024 · I have a homebrew trap inverted V with the center at 40 feet and the ends at 12 feet on a small suburban lot. The traps are N4UU-style using 2 inch PVC pipe and RG-8 coax. …

Dec 8, 2020 · Using RG/U 58 cable, the K factor (length/diameter ratios) for the wire end is .97, and the K for the shielded end is .95 based on 1/2 wavelength of cable and the table in the …

May 29, 2024 · RG 8 / 58/59 Coax was Trash too. K8PG Paul Morse Music K8PG, Jun 4, 2024 #12. W7DGJ likes this. W7DGJ ...