Dec 28, 2022 · Got a hole in the lower brake fluid reservoir by the rear brake pedal on an '06 VTX 1800 R . Anyone know where I can get a replacement . I'm in Pa. a little south of Harrisburg if that helps any . Thanks , riders.

Mar 8, 2015 · Yes, Assuming there are no air lock or leaks. It will keep it topped off if there is enough coolant in the reservoir to fill the radiator. It's important to keep the reservoir at the full mark. "When the cooling system heats up, the coolant or fluid flows into the radiator. The radiator cap is like the air release system of a pressure cooker.

Jan 6, 2022 · There are 2 lines shown on the reservoir, cold and hot. You burped the system so with a cold bike the reservoir should be at the cold line, add if necessary to make it that way. Run the bike to get it as hot as possible, the tank level "should" have moved up because the coolant expanded in the system, it exceeded the psi rating of the radiator ...

Oct 28, 2011 · Hi guys. Last week I changed clutch/brake fluid in prep for my trip to Crockett for the m&g and then to Lafayette, La. Long story short my clutch started slipping and when I checked the clutch fluid it was empty. Added fluid and rode back to home. Any body rebuild the reservoir or is it just better to buy entire unit.

Nov 19, 2009 · 2003 VTX 1300S- ISO grips, cruise control, ShowChrome Hwy. bars, RiverRoad bags, Mustang seat, CustomWorld back rest and luggage rack, Mustang tank bib, painted side covers, Spyker air box, Aeromach risers, Kiwi exhaust mod., Glenns A/F.

Jul 23, 2009 · RESERVOIR prices based upon being sent to me fully disassembled. You will reuse your parts and re-assemble them upon arrival. If you want us to disassemble and re-assemble them, add $35.00 per reservoir.

Apr 25, 2007 · Under the chrome side cover you'll see a bleeder. Open it until the reservoir is almost empty. Close the bleeder and fill the reservoir with Vlavoline Synpower DOT 4 fluid. Re-open the bleeder and keep filling the reservoir until fluid comes out clear down below. Close the bleeder and make sure fluid level is at the line inside the reservoir.

May 20, 2009 · Keep an eye on the reservoir level, do not let it drop enough to expose the inlet. Once the old is purged, all you need to do is to put the float board back on top of the fluid in the reservoir and add enough fluid to float that board up to the full line; replace the rubber expasion seal and then the cover with screws.

Apr 25, 2023 · As far as burping the system after emptying/refilling the reservoir, I would say you probably wont have to burp the system If you don't introduce air into the main system then you shouldn't have to burp air out of it. The tank is only connected to the motor by a small line running from the radiator cap/filler neck. (on my early bike)

Sep 9, 2004 · I did an oil change on my 18 this weekend and I noticed that the coolant reservoir seems "exposed." Is this an issue that I need to keep an eye on? It seems to me that a rock or a speed bump could punch a hole in that little bugger.