Mar 22, 2013 · So, you’ve come up with an old axe head, or your current axe has a damaged handle, and you want to get it back into serviceable condition. Here are the steps involved in taking this project on.

How to Re-haft an Axe: I found an old axe head in the garage without a handle and decided to make a new one. As I wanted to make a short handle I could use almost any wood for the handle so decided on some reclaimed oak. If you want a long handle for a large axe, use more…

Jul 24, 2020 · Occasionally, Axe handles break, and replacing the handle can keep a well-worn axe-head in service and keep you from having to purchase a replacement. In this how we show you how to haft and axe

Mar 21, 2015 · I'm rehafting my Council Tools FSS boys axe with a Velvicut handle, and I'm about ready to drive the wedge in. It's been years since I rehafted an ax and I'm trying to remember where the kerf should set.

Nov 28, 2006 · I finally got the time to rehaft a bunch of axes I have. I've been meaning to transition everything over to straight handles, to refurbish a double bit plumb 3lb head and to shave down the gransfors handle.

Once you get the head all cleaned up, it is time to haft it. The hardest part of hafting an axe is the sanding that needs to be done in order for the handle to fit properly in the eye.

Jan 19, 2015 · Using the lower (smaller) side of the eye as your guide, begin to remove material to achieve and even and light friction fit. If the kerf isn’t centered, you’ll want to start removing material on the thicker side first.

If an axe breaks, it is almost always the shaft/handle that is the culprit. A poor quality or damaged shaft is a major safety risk. However, if the head is still in good condition, you can re-use your tool by fitting a new shaft.

Jun 6, 2023 · See the video on how to reinforce the handle here: https://yo...

I've always wanted to remove the handle of an axe while saving the handle to reuse. Saving the patina and learning lessons by getting my hands dirty.