RG45 (W1060) and RG60 (W1200) are both solid wire oxyfuel rods. RG45 is a copper coated low carbon steel rod which is widely used for oxyfuel welding on mild steel. It has good ductility and good machinability. Its typical minimum weld tensile …

DURAMAX RG60 is a special copper-coated steel rod designed for oxy-acetylene (autogenous) welding of carbon or carbon-manganese steels of medium mechanical properties. It is suitable for welding construction steels and has a higher strength than INEGAS G1.

Conforms to AWS A5.2, R60. Widely used for welding carbon steel pipes in power plants, process piping and other conditions of severe services. Use where minimum tensile strength of the steel does not exceed 60 psi.

Harris® RG-60 Solid Wire Oxy-Fuel Welding Rod is a high strength, bright finish, steel welding rod that uses a neutral flame. Welding rod measures 1/8" x 36" and comes in a 50 lb box. Welding rod does not use flux, but puddling of molten weld metal will bring impurities to the surface.

RG60 is used to produce high tensile strength quality welds on low carbon and low alloy steels such as sheets, plates, pipes of grades A and B analysis and structural shapes. It is recommended for critical welds that must respond to the same annealing and heat treatment as regular grades of cast steel.

RG60 is used to produce high tensile strength quality welds on low carbon and low alloy steels such as sheets, plates, pipes of grades A and B analysis and structural shapes. It is recommended for critical

RG60 conforms to AWS A5.2 R 60. While thiSmalloy was originally developed and are commonly used for oxyfuel welding, they can be used for TIG welding. Flux is not needed but, "puddling" of the molten metal will bring any s ale or impurities to the surface.

3/32" x 36" (5) W1200 (RG60) Bare Solid Wire (GTAW) Oxy-Fuel Welding Rod. Blue Print; Services & Solutions; Careers; Feedback; Help; All Products. Abrasives Adhesives, Sealants, and Tape Cutting Tools and Metalworking Electrical Electronics and Batteries Fasteners ...