Immersion-Bath Conveyors allow for continuous extraction of quenched and immerged parts from liquid baths filled with oils, polymers, water or salt. Our conveyors are always well adapted to these products since we can choose from a large variety of different conveyors.

Aug 9, 2021 · The methods that normally come up in them involve manual, oil bath, oil stream, drip, and slinger disk. All of these methods prioritize the application of oil in the upper edges of the link plate and the lower span of the chain.

For drip lubrication, ensure that the flow rate is as specified and that oil is properly directed onto the chain. Check the oil level in the reservoir at least daily and refill as necessary. For oil bath, slinger disk and oil stream lubrication, check the oil level in the casing or reservoir at least daily and add oil as necessary.

Oscillating Conveyors (Shaker) The patented Pax EGD conveyor is an electrically driven, oscillating type conveyor that utilizes an elliptical gear drive (EGD). Utilizing elliptical gears in a sealed oil bath provides an extremely reliable drive and a high conveying speed at low RPMs.

Jan 27, 2019 · Oil bath lubrication involves running a short section of chain through oil, with the level extending to the pitch-line of the chain at its lowest operating point. Slinger disk lubrication consists of a rotating disk picking up oil from the casing’s bottom and …

May 1, 2011 · Self-lubricating LAMBDA chain, designed for power transmission and conveyors, carries its own oil in impregnated bushings. Nickel-plated versions offer higher corrosion resistance; LAMBDA II...

STORCH Magnetic Slide Conveyors provide Industrial Automation conveying hot, cold, wet, oily or dry ferrous materials virtually anywhere trouble free conveying is required. Magnetic Slide Conveyors use permanent and powerful ceramic or rare earth magnets that are chain driven under a non-moving slide plate.

Nov 1, 2022 · Armor Lubricants industrial oil are designed to provide effective lubrication for chain conveyor at high temperatures and prevent residue build-up. This oil also increases the life of the conveyors and drives.

A synthetic food-grade oil with a pour point of -57°C (-70°F) is then applied to lubricate the chain effectively, even at -45°C. This solution has resulted in a savings of four hours of downtime per week.

Sep 16, 2017 · Chain conveyor systems can be lubricated manually via oil drip, bath or spray. The primary lubrication requirements are good penetration, sufficient film strength and good resistance to rust or corrosion.