Aug 9, 2013 · I am using a DELL Latitide E6530 and was about to upgrade it to use a OCZ SSD 256G Drive (VTR1-25SAt3-256G). However the E6530 does not recognize the drive even after a BIOS upgrade (A12) . I tried the drive on a HP laptop and it …

Oct 7, 2011 · I have a Dell XPS 630i with the newest bios. I also have a spanking new OCZ Agility 3 240GB SSD. And these two simply will not communicate very well. If the computer is off before booting, everything is fine. System boots like a charm in a few seconds.

Nov 14, 2010 · Hi, I wanted to replace the hard drvie that came with the Dimension 420 by a new solid state drive from OCZ. Although using the latest version of the Bios (A7, with very few setting options), the

Mar 7, 2013 · Bought an OCZ SSD and using a caddy I've replaced the ODD and mounted the SSD. I will need full disk encryption on both disks, without sacrificing SSD speeds. Also I will need to boot the SSD directly on power up. Using A11 bios (latest), but I find it buggy because of the following issues: - The SSD cannot be booted directly.

Jan 27, 2013 · (I also posted in the HD forum; delete one of this if felt to be redundant.) I have gone thru several maneuvers to try to get this to work.Machine is Dell XPS L501x, with 4GB RAM, Core i7, Win7 ...

Jun 21, 2012 · I have a very strange issue here whereby the backlight for the screen on my Vostro 3550 laptop turns off when I have an OCZ Agility 3 SSD installed. If I remove the SSD and install a regular hard drive, the problem goes away. I have tried the same SSD on two identical Vostro 3550s, and it causes the same issue on both laptops.

Mar 10, 2011 · Hello all. Had some experiences with the above and having trawled the OCZ forums I thought I'd get the Dell perspective. Essentially I have a Latitude e6410 with BIOS A06. I decided to take the p...

Jan 16, 2013 · I installed a ocz ssd drive into a studio 1558 and the drive won't show up in the bios. When (advanced) sata operations "AHCI" is selected the system runs really slow and locks up. I tired changing to ATA and the system doesn't seam to lock up in the bios but the drive still doesn't appear. I also tried updating to the latest firmware also

Jun 8, 2019 · Unless you're having a particular issue with your SSD that the firmware fixes, I wouldn't worry about it. AHCI or RAID should not make any difference, I say this knowing that Samsung released their firmware updates through there Magician program which cannot see through a RAID Driver and you have to be in AHCI mode.

Jun 5, 2018 · If there's an SSD in the main drive bay (either 2.5" or M.2) both SSD and PCIe/NVMe drives work in the WWAN slot. If you fit two PCIe/NVMe drives the BIOS only sees the drive in the WWAN slot. A 2.5" SSD drive comes up a Primary Hard Drive in the BIOS. An M.2 SSD in the main bay comes up as M.2 SATA in the BIOS.