Jun 21, 2022 · Having the same issue. NZXT just sells premium faulty products with shitty software it seems. I wasted time rebuilding my computer into 2 H7 Elites thinking that one was defective. Nope, they both report the RGB controller but don't show any of the RGB channels being used. The worst part is each fan is stuck on the ugliest color...

Oct 15, 2022 · I am working on building a core build with NZXT N7 B550 and found an article. Going for White / RGB build with NZXT case, fans, and later an AIO just to have it all sync up with the CAM software. Will be ordering a Asus aura sync compatible memory for the build. Hopes this helps your decision.

Each nzxt rgb and fan controller gives 6 rgb channels and 9 power (with splitters) so that's 12 rgb channels and 18 power total. For the AIO push pull configuration you want to take 2 of the splitters from the rgb and fan controllers and use them to split the cpu fan cable so you can plug all 6 fans into the cpu pump.

Oct 28, 2020 · NZXT RGB CONNECTOR REMOVING CABLES. Once the wires are switched you can line up the 5v white wire with the 5v JRAINBOW pin on the MB. Fire up your PC and watch them glow :) With MSI Mystic Light through Dragon Center, I was able to specify the RGB colors for this specific JRAINBOW port. Boom! works perfect. LEDs AND FINISHED PRODUCT

Oct 30, 2020 · It has been able to control Aura compatible RGB RAM for a couple of months. Works with the g.skill RAM in my current build and was working with the Corsair RGB Pro RAM in my old build. Must have ASUS Aura, Corsair iCUE and NZXT CAM installed.

Sep 19, 2023 · I have the Nzxt N7 Z790. My Kraken Z73 RGB is plugged into the usb hub also sold by nzxt. Maybe I have something plugged in wrong with one of my hubs? My ram rgb freezes the moment signal rgb and nzxt cam are running also which is the most frustrating issue.

The H6 RGB comes with a NZXT to 5v ARGB adapter pre-installed. I’ve also used the above cable to convert NZXT’s RGB connector to 5v many times. Reply reply More replies More replies More replies

Aug 23, 2022 · iCue: might be possible using NZXT —> Corsair adapters from piratedog.tech and a Commander Core/Pro/Lighting Node device (you’ll have to research that one a bit because the lineup of Corsair RGB controllers is a bit confusing, and although I’ve bought adapters from piratedog.tech, I have not tried to convert NZXT)

Jun 3, 2023 · Each controller will take up 1 slot on the RGB ports of the V2 controller. The Flow case doesn’t come with RGB fans at all, so you could buy 4 separate fans, or you’d buy another 3 pack + 1. There would be enough RGB slots with either configuration because the V2 controller allows for 6 RGB connections. (3 in RGB 1 via RGB controller.

May 31, 2023 · I have a NZXT h7 flow case with three NZXT fans and a NZXT Kraken Elite RGB 360 with three fans connected to a controller. The case fans can be controlled by openrgb, but only if you connect them to the mainboard directly via ARGB pins. The Kraken RGB fans are connected via a NZXT controller, which is connected to the mainboard via USB.