[IMX93] MIPI DSI VIDEO Mode and PLL Clock Setup for Multiple ...
Oct 24, 2024 · I'm trying to port the mipi dsi interface and bridge the signal to HDMI output. There are several resoultions are required, such as 1080P, 720P and 800x600. So I setup the lcdif VIDEO_PLL timing for supporting these resolution. &lcdif { status = "okay"; assigned-clock-rates = <1039500000>, <14844...
Solved: MIPI DSI display problems - NXP Community
May 21, 2015 · Solved: Hello everyone! I am currently trying to enable my MIPI-DSI display and I have some problems with my module and I hope you can help me.
iMX8MP MIPI DSI Bring up：wait payload tx done time out
Jul 11, 2022 · Hi， We try to bring up MIPI-DSI interface for LCD panel, the panel driver chip is st7701c, we have adapted the code driver by referring to the NXP official tutorial，but also happen the cmd timeout log，like this： user@imx8mpevk:~$ [ 32.946153] imx_sec_dsim_drv 32e60000.mipi_dsi: wait pkthdr tx don...
integration of sitronix-st7701 MIPI-DSI in u-boot (i.MX8M Mini)
Jul 15, 2022 · sec_mipi_dsi_host_transfer 0xff 0x77 0x01 0x00 0x00 0x13 sec_mipi_dsi_host_transfer 0xef 0x08 sec_mipi_dsi_host_transfer 0xff 0x77 0x01 0x00 0x00 0x10 sec_mipi_dsi_host_transfer 0xc0 0xe9 0x03 sec_mipi_dsi_host_transfer 0xc1 0x10 0x0c sec_mipi_dsi_host_transfer 0xc2 0x01 0x0a sec_mipi_dsi_host_transfer 0xc3 0x02 sec_mipi_dsi_host_transfer 0xcc 0x10
Solved: Interface MIPI-DSI to imx6 DualLite - NXP Community
Apr 6, 2019 · Hi, I am trying to interface MIPI-DSI lcd panel with Imx6 Dual lite processor. attached LCD data sheet for reference. In my default device tree LVDS and HDMI display is already configured and added for MIPI-DSI in dtsi as following: " mxcfb1: fb@0 { compatible = "fsl,mxc_sdc_fb"; disp_dev...
IMX8MP mipi dsi config in devicetree - NXP Community
Oct 13, 2021 · Hello, im currently trying to change the devicetree to make the mipi_dsi work on our phytec i.mx8mp pollux board. This is what we tried: &mipi_dsi { status = "okay"; backlight0: backlight0 { compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lvds1>; default-brightness-le...
MIPI-DSI panel support on iMX8M Mini - NXP Community
Dec 20, 2019 · Hi All, We have made a custom board using iMX8M mini SOC. We need to integrate MIPI-DSI panel on this board. we have few doubts on, Which panel driver to be used ? the Frame-buffer driver or DRM driver? Referring to the document i.MX Linux reference Manual (4.14.98) In Section 6.2.2 Frame Buf...
"Failed to attach bridge" when trying to use MIPI DSI output
Jan 20, 2020 · Hi! I have the VAR-DART-MX8M Mini (originally had an "LD" configuration to convert MIPI DSI to LVDS using the SN65DSI84, but the hardware configuration was changed using instructions as in the file attached). I'm running Android 9.0 on the board, following these instructions, so the board is runnin...
MIPI-DSI Frames check - NXP Community
Dec 17, 2023 · Using a MIPI analyzer (LA5076 and oscilloscope) I'm able to check that the driver is correctly scheduled and the right behavior during the init phase (during the LP mode) : The frame buffer device seems to be ok : $ cat mode modes name virtual_size U:720x1280p-0 imx-drmdrmfb 720,1280 . My device tree blob configuration (MIPI DSI section):
How to enable MIPI-DSI on iMx8DualX QNX platform - NXP …
May 9, 2023 · 3. The mainboard need support two channel MIPI-DSI video signal output. 4. Now, mainboard can communicate with display via I2C, but it can not send video stream of MIPI-DSI to the display because of that mainboard was not supported the driver of MIPI-DSI to MAX96789. 5. So now we need help to support MIPI-DSI drivers on the i.MX8Dual platform.