It provides tables with specifications for standardized center holes according to DIN 332, center holes with threads, shaft offsets according to DIN 509, and conical shaft ends with a 1:10 cone slope. The standards aim to facilitate clamping, mounting of counterpieces, and interchangeability of parts. Copyright: © All Rights Reserved.

May 19, 2013 · 单位 毫米 1 应用范围 该标准适用于没有螺纹的 60°中心孔该螺纹指的是通常机械制造中所使用的。根据 DIN 333中心孔型号 R及型号 A 至 12.5 mm×26.5 mm 和型号 B 至 10 mm×21.2 mm 用中心钻...

Wichtiges Fachbuch: Hoischen: Technisches Zeichnen (36., überarbeitete und aktualisierte Auflage): Grundlagen, Normen, Beispiele, Darstellende Geometrie, Geometrische Produktspezifikation. Fachbuch. Skizzen und Maßtabellen zu den Zentrierbohrungen Form A , B , C und D. Download 2D-Blöcke im Downloadcenter.

In the present revision, the standard is revised in line with the latest standard DIN 332 Teil 2 — 1983 ‘Centre holes 60° with threads for shaft ends for rotating electrical machines’. This standard covers three forms of centre holes, which corresponds to the manufacturing types depending on …

Oct 16, 2010 · To get all the dim.s you need to get DIN 332 Part 2. It is a center with straight (straight 60 deg) flutes and 10.2mm dia at the first point and 13 mm on the second step. Listed as 60 deg. center with thread for shaft ends on electric motors.

DIN 332-DR M12 DIN 6885-1 41 10 h9 8 80 Ø39 8.5 30 12 516.5 M32x1.5 M32x1.5 134 48 115.5 24 80 Ø230 j6 Ø300 M5 Ø262 Ø38 k6 70 4 5 Ø265 ±0.5 4xØ14.5 163 80.5 4x90° ...

Step drills for centring according to DIN 332 Web thinning ≥ Ø 14.000 • web thinning value refers to nom.-Ø d1 • relieved cone • 60° countersink angle • for tapping size holes with centering to DIN 332, sheet 2, form D

Richtwerte D1 für Zentrierbohrungen (DIN 332-1) Form A Wellendurchm. D1 d1 d2 t min a in mm über 4 bis 10 1 2,12 1,9 3 über 10 bis 15 1,6 3,35 2,9 5 über 15 bis 22 2,5 5,3 4,6 7 über 22 bis 40 4 8,5 7,4 11 über 40 bis 63 6,3 13,211,5 18 über 63 bis 100 10 21,218,4 28 Form B Wellendurchm. D1 d1 d2 d3 b t min a in mm über 4 bis 10 1 2,123 ...

Keys: according to DIN 6885 (domed type). Up to three different flange dimensions are available for each size of helical gear unit, Spiroplan® gear unit, AC (brake) motor and explosion-proof AC (brake) motor. The pos-sible flanges per size are indicated in the relevant dimension sheets. ered without special transportation fixtures.

M12 Ø 10.2 Ø 13 Ø 15.9 28 37.5 7.6 2.5 Ø 17 11.73. M16 Ø 14 Ø 17 Ø 20.1 36 45 9.5 2.7 Ø 22 15.59 ... D M8 DIN 332 (M8= reference D1) Via Bersella, 5 - 42018 SAN MARTINO IN RIO (RE) Italy - P.Iva 00171030356 www.omp-italy.com - Tel.+39 0522 698931. You might also like.