Apr 2, 2007 · I have tried every combination of indoor/outdoor/any with both low and high frequencies, and the highest tx power I can achieve is 6dBm. What am I doing wrong? I'm in regulatory-domain (no other choice), united states3, on v7.13.2.

Mar 19, 2018 · According to specifications, the maximum distance is 1km. I have 500m, it also says that the maximum synchronization is 2.5Ghz, I have them linked to 2.3Ghz. Having said that, my problem is: I can not pass more than tx = 410 Mbps and rx = 400 Mbps. If I do the test with tx and rx the speed it gives me is tx = 210 and rx = 180.

Mar 20, 2022 · This indicates that either your output power is low compared to the other end or the other end is experiencing some overload/desense. You might try rotating your dish (changing polarity) and check your aim to peak up the received signal on the other end.

Use a down tilt calculator to determine the best angle for the AP. Keep your cells small. Tune the CPE in both the horizontal and vertical planes. Carefully evaluate your use case for ceiling mounted APs. User devices are usually polarized vertically and often held at 45-90 degrees.

Mar 28, 2021 · I've bought a MikroTik LHGG LTE6 kit to boost reception for my home internet because the 4G connection where I live is quite unstable (and 4G is the only way to get internet here). However, compared with a standard router that comes with an internet subscription it …

Dec 26, 2018 · Alignment based on RSSI and not on led or TX sector info: I could systematically gain 4-5 dbm over a "center" TX sector value.

Aug 25, 2022 · This device meets the Maximum TX power limit per ETSI regulations. The frequency and the maximum transmitted power in EU are listed below: 57-66GHz: 34.92 dBm. An Operational mode in the 60 GHz band: 58.32 GHz, 60.48 GHz, 62.64 GHz.

HT Tx Chains - the receive channel, HT Rx Chains - the transmission channel. If you are using the MIMO, it is best to activate both antennas on reception and transmission (chain0, chain1). Of course, if there is only one antenna, then activate one channel.

Oct 25, 2023 · The LHG is an outdoor wireless router with a built-in directional antenna. It can be used as a CPE or for point-to-point links (use RouterOS wireless mode "bridge" to work as a single-client AP for point-to-point scenarios).

The LHG 5 is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.