Jan 4, 2020 · I have physically installed all the hardware for my Batrium Watchmon 4.3 and 7x Leafmons connected to 28x Nissan Leaf Gen 1 modules in 14s4p configuration using Victron Multiplus II GX Inverter I amlooking for your advice on what settings I should configure the Batrium for, specifically the following: Cell Hi Cutout Bypass Voltage

May 7, 2020 · Leaf cells I don't know, but I have tested some other EV cells (Fiat 500e) and got IR valves as low as 0.5 m? which is pretty bonkers. All that really matters is how it stacks up against a healthy cell of the same time. There no set good or bad range without knowing what was supposed to be on the spec sheet.

Oct 7, 2018 · Hello Everyone! Steve here with Million Acre Farms in Punta Gorda Florida, and I wanted to show the initial mockup of my Outdoor Leaf Cell Power Station. This build is an Outdoorpower stationfor operating the small construction office we will be using whilebuilding our farm. As it will Take...

Apr 11, 2018 · I am selling a large quantity of Nissan Leaf Gen 1 Lithium Modules. Current price is $45/module which comes out to around 18 cents per watt hour! These are second life Nissan modules which have been tested and graded. They are guaranteed to have at least 35Ah capacityat 50 amp discharge rate from 4.1V to 3.0V per cell (2 cells in series per ...

Oct 7, 2019 · Each 1/2 side of the leaf cell = 1x 3.7V "cell", so you start with the most -ve cell = your battery PACK 0V & step to the centre for B1 BMS point, then to the right side +ve = B2. connection to next cell module -ve (also =same B2), center = B3, right side +ve =B4 connection to next cell module, etc, etc, then center of last cell module = B7 ...

Oct 13, 2024 · I have 12 Gen 4 Modules from a 40kwh Nissan Leaf. These are "spares" after I short circuited half the pack in the EV build due to a bad cell. This other half appears to be fine but I'll want the whole BMS and will be monitoring it initially for any issues. Effectively I have 20kw at my disposal minus degradation.

Feb 16, 2021 · Make you own PV storage battery from Nissan Leaf Gen2 cells.Battery terminal brackets for Nissan Leaf Gen2 cells.4 different terminal blocks for arranging your cells and bus bars, open or closedSpacers for the cells from which you removed the metal brackets with the screwsCovers for 2-6-7...

Oct 22, 2024 · I operate between 4.0v/cell max (14 * 4.0v = 56v hi) and 3.54v/cell min (3.54 * 14 = 49.5v) and <0.06C (low stress). In my system, a typical Solar day doesn't use the whole 3.5v - 4.0v range but rather in summer, things stay near the upper end and in winter the lower end.

Oct 15, 2018 · Depends if the breaker is fast or slow blow. For e medium breaker it can last 2-10 seconds. Im not sure that is quick But once again totally depends on the breaker and people tend to think that the rated ampere is where it breaks suddenly but thats not true.

Oct 4, 2018 · Hello all, Steve Jackson here, and I am hoping to get some help determining configuration for my leaf cells into a usable powerwall. So, I have 24 Leaf Cells, Gen2 64ah, 7.2v 2s, that I want to configure into a pack...