Dec 14, 2021 · Connect the development platform to your PC via USB cable between the "SDAUSB" USB port on the board and the PC USB connector. Open the terminal application on the PC (such as PuTTY or Tera Term) and connect to the debug COM port you determined earlier. Configure the terminal with these settings: 115,200 baud rate; No parity; 8 data bits; 1 ...

The Freedom KL25Z is an ultra-low-cost development platform for Kinetis ® L Series KL1x (KL14/15) and KL2x (KL24/25) MCUs built on Arm ® Cortex ® -M0+ processor.

FRDM-KL25Z USB-MSD Device using internal Flash. This application shows the FRDM-KL25Z as a USB-MSD device with a FAT in 74k of its internal Flash. There is only a standalone application (rather than boot loadable ones) in order to maximise the space Flash available.

Freescale Freedom KL25Z hardware, FRDM-KL25Z, is a simple, yet sophisticated design featuring a Kinetis L Series microcontroller, the industry’s first microcontroller built on the ARM® CortexTM-M0+ core. Guide for more information. Optional: Download and Install the P&E OpenSDA USB Drivers found at www.pemicro.com/opensda .

Nov 16, 2015 · I have the FRDM-KL25Z board and I want to use the DFU-Demo to write a bootloader to the device flash using the KL25Z usb connection (not the openSDA). when I try to connect the board to the computer, the computer does not seem to detect the board as it does in the openSDA usb conector.

Connect a USB cable from your computer to the OpenSDA mini-B USB connector. The board appears as a removable storage drive with a volume label FRDM-KL25Z. The MSD Flash Programmer also includes a USB virtual serial port, which requires an .INF file for installation in the Windows ® platform.

FRDM-KL25Z can be used to evaluate the KL14, KL15, KL24 & KL25 Kinetis L series devices. It features a KL25Z128VLK, a device boasting a max operating frequency of 48MHz, 128KB of flash, a full-speed USB controller, and loads of analog and digital peripherals.

This means, that the board can work as USB host, for e.g. USB sticks. The other USB port is used to program the KL25Z. Also there is a small accelerometer IC and a RGB LED, next to the tuch slider on the right.

The KL25Z SoC has a USB OTG (USBOTG) controller that supports both device and host functions through its mini USB connector (USB KL25Z). Only USB device function is supported in Zephyr at the moment. Programming and Debugging

Apr 8, 2019 · It is packaged as a development board with connectors to break out to strip board and breadboard, and includes a built-in USB FLASH programmer. Please note that on this MCU in SPI Slave mode pins labeled MOSI behave as Slave Output and …