Sep 22, 2009 · 99-00 JDM B20B are 9.6:1 PHK compression pistons Rated at 146hp 97-98 USDM B20B are 8.8:1 p3f compression pistons Rated at 126hp 99-00 USDM B20Z are 9.6:1 PHK compression pistons Rated at 146hp Now, the difference between the JDM and USDM, NOTICE, ITS THE SAME!!! Now, how to tell the difference, so you don't need to …

Sep 10, 2003 · Apparently the JDM B20 has 160 hp, and, if the H22 swap proves too costly, I want the B20. Does anyone know where to find it? :shrug2:

May 22, 2008 · ok, im trying to find a JDM b20 complete swap, i'd like it to be vtec but it dont matter, but all i can find is the engine only. does anyone know where i could find a complete b20 engine swap, and if so, how much is the swap?

Sep 21, 2018 · I have replaced the USDM b20 in my 2000 CR-V with a JDM hi-comp b20b. Mechanically, the swap went pretty smoothly, and once we figured out the CKF sensor situation, I have since properly done the wiring jump-out to solve the P1337 code. Problem is, the car still runs like crap, idles terribly...

Dec 8, 2010 · I have a 2000 Cr-v with a B20Z2 engine. Like other B20's the valves have blown, and probably the head gasket now too. I want to replace the engine myself to save money. I want to swap it with an engine which is easiest to do. Since my B20Z is USDM, do I have to replace it with another USDM, or...

Aug 15, 2006 · putting in a jdm b20 swap in a 92 ex I have the following parts from a 94-95 integra starter alternator axles ecu p75 intake manifold with throttle body exhaust manifold fuel rail/ injectors mounts s80 transmission powersteering pump wire harness shift linkage I have p.s and A/C what parts do...

Jul 28, 2007 · And just because something is JDM doesn't necessarily mean it's better. If you don't really know what you're talking about then no need to respond. And to the original poster, I'm not exactly sure what your question is. Are you asking if the B20 is an acceptable swap motor? Yes, you'll be fine with a B20 in your Integra.

Jul 21, 2010 · I recently posted a thread talking about my new car and engine swap am planning on doing. I am picking up a OBD1 JDM B20 complete swap this Friday to swap into my 1991 Honda Civic HB STD. I know that I am going to have to convert from DPFI to MPFI, buy engine mounts, ecu jumper obd0-obd1, make...

Jul 19, 2003 · correction, not all p75 heads are from b18's, some came from b20's like the ones found in the crv and others came from jdm b20's out of honda orthia's. i got all this info off honda tech so you can check there extensive b20 thread. but basically it states that the b20 heads from honda orthias have larger intake valves but are still stamped p75.

Feb 8, 2015 · I'm stuck between a 98 hatch d16y7 w/ y8 mani, 95 hatch b20 vtec, b20b block (built), 99 si trans, b16 head port and polish, 255 walbro fuel pump, 310 injectors, golden eagle cam gears and lastly a 92 civic coupe with a jdm b16a and gsr trans. More curious to what kinda mpg and hp/tq the b20 will put down, if I should consider it at all. Thanks