Jul 2, 2002 · Iscar has a web page with PDF files of their tools and inserts. I believe it is Http://www.Iscar.com. You may import them in a DXF format, but they will only be in 2D. Still it is an easy start when you are trying to draw up a holder. This is especially true in MC's Lathe.

Oct 8, 2002 · Draw if you will a line, rotate that line 1.5 degrees (to simulate the bend). Observe where the end of that line now is. If this is looked at as the tool, then you can see that the cut diameter is now larger as the apparant tool length is shorter. the SolidCAM package that Iscar sells accounts for this bending and allows you to program to size.

Jun 14, 2011 · The relation between RPM and chip load is all based off calculations that Iscar provided to CNC when they designed the toolpath. Iscar spent many years tuning these ratios for maximum production and tool life. I have a 1/2" 5 flute chatterfree endmill that I have been using for almost 3 years. It has done so many jobs that I have lost track.

Feb 14, 2019 · ISCAR HEM LIBRARY Join us! eMastercam - your online source for all things Mastercam. Together, we are the ...

Jan 13, 2012 · I have a job coming up that I need to drill many 14mm holes and we are going to try using Iscars Sumocham Drills. I would like to know some speeds and feeds you guys are using if possible. I am drilling 304L SS plate 3/4" thick. Thanks

Aug 2, 2013 · Select the ISCAR tool library then go to the parameters page of a dynamic toolpath and theres a slide bar on the tool page and where the stepover controls are thers a drop down for 5,7 and 10% stepovers.

Jun 7, 2011 · I have found that Hanita's end mill are about the same performance as Iscar's chatterfree end mills with a lot less price. I currently am running a 1/4" Hanita (TF4050772) at s7640, f210.33, 5% stepover, .530ish deep 316/316L sst and am getting over an …

Feb 22, 2011 · Check out the Iscar Quick Calculator on the forum FTP. I checked what you posted and to maintain a .005 chipload with chip thinning on that tool the adjusted chip load would be .0063 FPT. Which gives you a spindle speed of 3629 and 91 IPM feed.

Oct 1, 2020 · Mitsubishi, OSG, Walter-Titex, Kennametal, Iscar, Mikron, and Sandvik for Coolant-Through Drills. My thoughts being this: What is the Tool Life (Holes Drilled) versus Drill Cost? This gives you the "Dollars/Cents per Hole". Is there an option for Re-Grind and/or Re-Coat after grinding? Often the right coating might give you 2X-10X the number of ...

Aug 2, 2012 · Switch over to the Iscar Library and you will then see a Iscar HEM check box appear. Click on that and the slider will now function. This ability was only activated with their tools and not others, but you can use it and then redefine them and make up your own library of tools from other manufactures.