INTERNATIONAL STANDARD ISO 15973:2000(E) © ISO 2000 – All rights reserved 1 Closed end blind rivets with break pull mandrel and protruding head — AIA/St 1 Scope This International Standard specifies dimensional and mechanical characteristics and application data for closed

ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head — AlA/St Published (Edition 1, 2000) This publication was last reviewed and confirmed in 2021.

International Standard ISO 15973 was prepared by Technical Committee ISO/TC 2, Fasteners.

Material: Stainless Steel, Iron, Aluminum, etc.; Complete Specifications & Dimensions; Surface Treatment: Customized, Sufficient Stock.

ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head — AlA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm. Want this as a site license?

Mechanical properties: The minimum shear load, minimum tensile load and maximum mandrel break load shall be as specified in Table 3. when tested in accordance with ISO 1 4589.

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Blind rivets in accordance with this International Standard shall have a rivet body made of aluminium alloy (AIA) and a mandrel made of steel (St). Material specification is at the discretion of the manufacturer. The surface finish shall be natural with a protection for storage.