Sep 17, 2013 · Our New Haas ST-10 Hello All, This will be an ongoing post meant to chronicle the good, the bad, and the ugly of our Haas ST-10 purchase. Our old Hyundai Hit8s was great, but it broke again and the service cost predictions were $5K and up so we decided on new. We know all about the Haas being a "throw away" machine we have heard that one a lot.

Nov 7, 2010 · I'm currently running a 1994 Hyundai HiT 8S and thinking of replacing it with a new Haas ST-10. My garage is my shop and has limited space and power (running a from a phase converter) so machines much bigger, heavier, or more powerful than these are out of the question for me. I mainly run 3/4" diameter delrin and 303SS from bar.

Dec 2, 2016 · HAAS LATHE G54 WORKPIECE OFFSET - Perform these steps when changing a workpiece to establish new Z0. - Clamp new part in the chuck. - Use any previously set tool, move toward the part, and take a light cut to clean-up the face. - On the control, move your cursor to the Z column on the G54 work offset page…ensure you are on the work offset page!

Feb 19, 2004 · You're missing the Company Directive at Haas, which clearly states that all engineering improvements on any model of Haas machines MUST BE accompanied by another engineering change, which must decrease the ability to maintain the coolant system. The SL10 was a disaster, sounds like the ST is a little worse.

Feb 15, 2025 · 2014 Haas ST-10 Lathe (Challenging Problem) Thread starter AllthingsCNC; Start date Yesterday at 2 ...

Nov 28, 2016 · After pricing out a TL-1 with options its so close to a bare bones ST-10 which offers way more. Initially I just need stuff for short run of parts and the TL-1 would get the job done but the ST-10 seems like it would open the door for a lot more future opportunity even though its more than I really want to spend now especially since its not the ...

Nov 25, 2009 · I am attempting to install a manual 4 jaw chuck on a new ST-10. Does anyone have a walk through/assembly/ help on doing this. I watched the chuck installation video and pulling the chuck was straight forward enough. The problem now is that I am hitting the draw tube when i go to install the...

Jun 29, 2013 · Nothing wrong with Haas lathes. I turn hardened steel with CBN on a Haas Toolroom lathe. The ST-10 is a capable machine and would likely be well suited for your applications. They're not as heavily built as some others, but it doesn't really matter for turning plastics and the Haas control is much nicer to use than a Fanuc 0i-TC.

Dec 19, 2016 · MAchine:Haas ST-10 2 axis lathe Material: 316 SS Size 1/4-28 LH Depth ~0.375 Tap: Widell spiral flute <--- this is what i have been using for everythign in this post Form tap Wlidell <-- waitign on drills to try this guy again. Setup: ER-32 tap holder in a NEW tool holder Work piece: 1/4" Rodd Drilled to size held in a 16C collet

Feb 6, 2007 · I have an ST-10 with a tailstock. I haven't used the tailstock lately. It has the manually adjusted tailbody with the programmable quill. The tailbody is tightened down by a large bolt head on a cam. When I broke the bolt free, the tailstock would move on the ways. (It was stuck from lack...