Normally the default gateway of LAN devices is a private IP address since the default gateway has to be reachable on the LAN without going through another router/gateway. But there may be exceptions I guess, for example some cable routers seems to have a mode which allows assigning the public IP address to another device.

Apr 3, 2012 · I understand that the default gateway is used to forward IP packets that do not match up in a routing table. So say I have a network with an IP of 192.168.1.32/27 . The first IP address "192.168.1.33" is setup as my default gateway. But I have been reading a lot that the "broadcast address" should always be the last IP.

Jul 19, 2020 · The UDM is the default gateway, but it doesn’t just live at 192.168.1.1, it lives at the bottom of the address range for every subnet you define - ie if you set up an IOT network at 192.168.3.x then the gateway for that network will be 192.168.3.1

Jan 29, 2024 · Well you should probably set it to your gateway address. :D Windows: Just open up cmd, type ipconfig and hit enter. Should be an IP next to "Default Gateway:" Use that number. DNS will probably be the same address as your gateway. Linux: open a terminal and type ifconfig. If ifconfig gives you an error, try "ip address show" without the quotes.

Aug 7, 2023 · In the Firewalla|Network|AT&T configuration, the Firewalla shows the IP address on that AT&T Wan as 192.168.1.69 and gateway of 192.168.1.254 which are obviously being assigned by the AT&T BGW320. This means that I can't get ports forwarded for my LAN EVEN if I open that same ports both on the BGW320 and the Firewalla for a device.

Jul 17, 2019 · If you are looking for more subnets then change it to 10.11.1.1/16. The /24 means you can only assign in the last group 10.11.1.* (where the asterisk is) the /16 means you can assign in the last two groups 10.11.. which should be …

May 14, 2024 · Trying to incorporate an UCG into my existing network. My ISP is Frontier. Gateway address is 192.168.254.254 , subnet 255.255.255.0 /24.

Jul 12, 2022 · Added a new vmxnet 3 adapter, powered on the vm re-entered the same static ip configuration it got the same mac address as the previous vmxnet 3 adapter and it still cannot ping the default gateway. Is there anyway to resolved this issue, i was able to ping the default gateway with the E1000e adapter from the time i changed it I've been ...

Jan 13, 2024 · So I bought a Unifi express and 8 port switch. I have a cable modem/router combo. I think the issue is that I can’t enable pass through mode on my modem, therefore when I connect it to the Unifi express it is pulling an IP from the DHCP server that is in the same range as the gateway on the express. Both gateways are set to 192.168.0.1.

Example: Internet --> WAN ip (address assigned to WAN port via dhcp from the ISP, or statically): 86.72.25.242 (random example, no idea if this is a real site) (your router) --> 192.168.1.1 (random example but probably right, assigned to the LAN interface (composed of several interfaces typically) --> your home clients (these may get ip ...