The pin(s) connected to Terminal B and the pin connected to Terminal A are a pin combination, and a full HBM test sequence is defined by stressing using all pin combinations defined in …

New: Non-supply pin to non-supply pin testing is limited to coupled non-supply pin pairs which present a possible weak non-supply pin to non-supply pin combination. Non-supply pin testing …

Jan 9, 2024 · In this blog post, we will introduce the traditional HBM pin combinations which are in Table 2B of the Joint JEDEC/ESDA HBM standard JS-001 2017 [1]. In a later blog, we will …

Present MM test methodology requires the application of three ESD pulses to a pin under test using several stressing configurations (referred to as pin combinations). Further requirements …

Apr 8, 2025 · Yes, as per JS-001 and exposed pad is part of the “pin” definition and should be considered for testing if it is electrically connected to the die for HBM testing. As you …

Jun 19, 2017 · The pin-pair selection procedure hence allows a true two-pin test which can be performed by any tester that meets ANSI/ESDA/JEDEC JS-001. This standard practice …

Aug 28, 2014 · and ESDA Working Group 5.1 (Human Body Model). The standard is intended to replace the Human Body Model ESD standard (ANSI/ESDA/JEDEC JS-001-2012). This …

Jan 1, 2006 · these custom test fixture boards changes the pin combinations and modifies the discharge waveforms. This standard practice was processed and approved for submittal to the …

Nov 30, 2019 · JS-001-2010 used the same pin combinations as used in the JEDEC [3] and ESDA HBM [4] standards before those standards were merged into JS-001. The pin …

The formation of a spark between a package pin and an approaching grounded pogo pin initiates the electrostatic discharge as the capacitance between the IC and field plate is rapidly …