The emtec EST Surface & Sizing Tester helps to predict the gluability, printability and coating-ability of paper and board by measuring the converting-relevant parameters surface sizing (surface hydrophobia) and surface pore structure.

The PDA.C 02 - Module MSC Standard Coating helps to detect changes in base papers, coating colors, and coated papers, which are not detected by standard test devices, but which can lead issues with the coating-ability during the converting process.

Example: Automatically calculated quality values t95 / t99 (Surface porosity) MAX (Surface sizing / hydrophoby)

The t95 results indicate that there are small diferences in the quantity of fine pores on the paper surface. The maximum value is 1.031 seconds for one side of the target PM sheets.

An instrument to objectively measure haptic parameters with a high-quality design, additionally equipped with extending measuring functions and a new method for digitization. Exciting Announcement!

In comparison to this, the emtec PDA.C02 Penetration Dynamics Analyzer (Module Standard) measures the converting process relevant parameters surface hydrophobia / surface sizing and the surface porosity.

Step 1: Fasten Security Plate using two #10 x 3” Wood Screws (item #9). Step 2: Fasten Strike Plate using two #8 x. 3/4” Wood Screws (item #6). 2. Door Jamb Prep. 1. Install Latch. Fasten Latch using two #8 x 3/4” Wood Screws (item #6). THE LATCH ASSEMBLY MUST BE ORIENTED AS SHOWN AND THE BOLT MUST BE IN THE RETRACTED POSITION FOR INSTALLATION.

The T95 was an American prototype medium tank developed from 1955 to 1959. These tanks used many advanced or unusual features, such as siliceous-cored armor, new transmissions, and OPTAR fire-control systems.

The emtec PDA.C02 Penetration Dynamics Analyzer (plus Module Standard, MST) helps to predict the gluability, printability and coating-ability of paper and board by measuring the converting-relevant parameters surface sizing (surface hydrophobia) and surface pore structure.

For an optimal runnability during the finishing or converting process of paper/board, certain specifications of the products are required to achieve an optimal result. Usually, these specifications are based on standard measurement methods …