© 2024 ICC Evaluation Service, LLC. A Subsidiary of the International Code Council

SET-3G epoxy adhesive is used with continuously threaded steel rods or deformed steel reinforcing bars. The manufacturer’s printed installation instructions (MPII) are included with each adhesive unit package as shown in Figure 1 of this report.

ESR-4057 Page 2 of 22 SET-3G epoxy adhesive is used with continuously threaded steel rods or deformed steel reinforcing bars. The manufacturer’s printed installation instructions (MPII) are included with each adhesive unit package as

Home - ICC Evaluation Service, LLC (ICC-ES)

Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems. Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.

Mar 25, 2025 · Simpson Strong-Tie Company, Inc. is a global leader in the design and manufacturing of engineered structural connectors and building solutions. The company provides a wide range of products and services for residential, commercial, industrial, and agricultural applications, including connectors, fasteners, anchors, software, and training resources.

The evaluation report, ESR-4057, was recently updated to allow the design of SET-3G adhesive for post-installed reinforcing bars using the ACI 318 development length provision. This blog has been reposted replacing SET-XP with SET-3G using the original design examples.

Our SET-3G epoxy adhesive, now code listed by ICC-ES ESR-4057 (opens .pdf) for both cracked and uncracked concrete, will give you the highest bond strength in the market for common-size rods while allowing your installer the time they need to install their anchor per the MPII after properly injecting the adhesive in a predrilled hole.

For evaluation for compliance with codes adopted by the Los Angeles Department of Building and Safety (LADBS), see ESR-4057 LABC and LARC Supplement. 58.6 MPa) to resist static, wind and earthquake (Seismic Design Categories A through F) tension and shear loads.

----- INTRODUCTION The constructed wetland system is the cornerstone of Arcata's urban watershed renovation program. This program includes major urban stream restoration, log pond conversion to a swamp habitat, pocket wetlands on critical reaches of urban streams, and an anadramous wastewater aqua- culture program to restore critical commercial recreational and …