Apr 18, 2013 · If the nuts are tight on the disk shafts then the only thing left that could be loose/worn are the iron brgs on the gangs.

Oct 1, 2015 · Learning how to troubleshoot a disc harrow ensures you can efficiently handle any problems that may occur in the field. Here's a quick guide to troubleshooting disc harrow …

Jan 10, 2019 · We could tighten the nut as much as possible with the gang dropped off the disk, then reinstall on the disk. Then we would set the disk onto hard ground with all the weight on …

A quickie video showing a repair to disc gang. The customer needed it immediately, so I didn't want to waste time filming. Hopefully there's enough footage h...

Feb 23, 2002 · Repair is pretty much the same for all. Take apart and replace the damaged parts. Blades are cheap (~$20) but I don't know about the rest. You'll need some big wrenches to …

Disk plows are most suitable for conditions under which mould board plows do not work satisfactory, such as in hard, dry soils, in sticky soils where a mould board plow will not scour, …

Apr 23, 2012 · We had a 3 disk semimount plow on our H in the 50's. It worked ok 99% of the time, but even with the heavy cast wheel it pulled the tractor sideways if I hit a wet spot.

Jul 22, 2015 · Place your good blade off your plow, over the new disc blades, center your blade on the new blade, Take a torch and blow out matching attachment holes. I have used this …

Jan 26, 2020 · Here are some key tips to keep in mind when choosing for a new disc harrow blade: 1. Check for an Adjustable Angle of the Gangs. The gangs of discs should be angled as …

Tearing Down Disc Harrow and Replacing Broken Discs. Tilling Field and Garden Harvest