Features easy to use RJ45, XLR5, or direct wire DMX inputs and outputs; Link multiple receivers for larger installs required separate addresses; 8 bit or 16 bit PWM output resolution ratio; Requires 12-24V DC input and DMX controller for operation

May 31, 2021 · XLR To J45 is an adapter to convert a DMX512 XLR connector to a RJ45 connector. The adapter makes it possible to use any CAT-5 ethernet cable as a DMX512 cable. XLR To J45 adapter is available in four versions, 3-pin male or female XLR or 5-pin male or female XLR. The different adapters can be mixed to make for example a 5-pin to 3-pin cable.

Nov 9, 2022 · The simplest way to run our DMX over ethernet is to literally use an adapter. These are easy to find, and allow you to run 1-4 universes over a single ethernet cable. If you’re looking to wire this up yourself, here’s an excellent resource for all the technical info.

Nov 18, 2019 · DMX (Digital MultipleX) is a communications protocol used mainly to control stage lighting. DMX512 data are transmitted over a differential pair using EIA-485 voltage levels. Network wiring consists of a shielded twisted pair, with a characteristic impedance of 120 Ohms, with a termination resistor at the end of the cable furthest from the ...

XLR DMX to RJ45 Connector DMX to Ethernet Male Adapter Plug, 5 Pin, This Adapter can use Any CAT-5 Ethernet Cable as a DMX512 Cable,(4 Pack)

Custom manufactured DMX to RJ45 cables in 6.5 foot lengths. These cables were made specifically for use with DMX products to work with controllers and designed to work with xlights. We also offer DMX to DMX cables and DMX to 3 Pin for Kulp/Wallys Lights Controllers.

This heavy-duty 5-pin DMX Male to RJ45 adapter from one of the most trusted names in pro lighting and sound is a great choice for productions, permanent installations, or just to keep around to future-proof your toolkit.

This DMX to RJ45 adapter allows you to connect your DMX devices to your network. It's perfect for controlling your lights, motors, and other DMX devices remotely.

CPOINT® DMXcompander is an adapter to makes it possible to run three DMX512 Universes in one CAT5 cable. That is 1536 DMX channels. Use CPOINT® DMXtender to extend your CAT-5 cable, use CPOINT® DMXterminator to terminate. A 120ohm terminator in a RJ45 connector.