Nov 29, 2019 · What ever you decide to use, put a level bubble on the riser and an offset one on the scope or below the scope. This will show if one is tilting or canting the crossbow. Hang a weighted string vertical 10 to 20 yards out from the front of the crossbow. This can be used to see that the scope is set up with the cross hair in the vertical position.

Jul 23, 2017 · Hey ya'll, looming for gun vise that will work on xbow, having issue leveling scope and think a gun vise will help. What vises do ya'll use, looking for one that will do the job without spending an arm and leget thanks

Mar 13, 2025 · 2 : Place your crossbow on the table or in the tripod put a level across the limbs. A shooting / working vise or tripod work best, but you can get by with some rolled up towels and books. Level the bow and hold it in place while it’s aimed at your rope. 3 : Loosen your rings and then confirm the bow is still level.

Nov 18, 2010 · Press with crossbow - all rope connections must be strong. "Vise" must be placed between the narrowest point of the limb and the cam. Angle limb / turnbuckle should be about 90 degrees (when press is uncocked). This angle when press ic cocked must be a little bit bigger as 90 degrees - in this case holds the "vise" very strong and securely.

Feb 19, 2025 · Mounted it on the side and this bike rack is an awesome crossbow vise. 25.00 on amazon, if anyone needs an inexpensive way to hold their crossbow. Barnett TS380, Tenpoint Venom X

Apr 6, 2025 · Tipton ultra gun vise These are great for working on crossbows or firearms Like new condition 110 tyd in this thread in this sub-forum in the entire site Advanced Search

Dec 26, 2012 · The crossbow press is running around $130.00 is the best I can find. Cliff Barnett Ghost 400 HHA Speed Dial

Aug 15, 2017 · On a conventional compound bow with a draw weight of 70 lb, it can take more than 500 lb to compress the limbs. Many crossbows have draw weights of 150 lb and higher. Although we have never tested the amount of poundage that it would take to compress a crossbow with a draw weight of 150 lb, we can assume that it could easily be upwards of 1000 lb.

Dec 11, 2024 · It's easy to remove the latch box, then clamp it in a vise to work on it: Remove the scope, leave rings on the scope Remove the butt stock Remove the safety knobs Remove the trigger linkage Remove the two side and the two bottom screws I …

Jul 31, 2020 · 2012 Excalibur Vortex 10 Pt. Rangemaster Pro Scope 20" Victory Decimators 100 Gr. 'China'-dermics 2017 CenterPoint Sniper 370 10 Pt.