The inline resistance values needed for properly mixing your RGB signal with the OSD RGB signal can be found by cross-referencing the inline resistors on your CRT's OSD circuit with the table below. An example of a typical muxing circuit is also shown below in a seperate image.

Feb 4, 2023 · However, the focus of this section is to identify sets that are RGB moddable. Since this is a long list, you can use the search box on the top right hand corner of this site to easily search for your CRT. *See notes below for models with an asterisk. Please see here for non RGB moddable CRTs here.

May 24, 2024 · Aside from some rare models, consumer NTSC CRT TVs lacked the ability to display native RGB. Over the past decade, RGB mods have picked up steam in the CRT enthusiast community. The original RGB modifications involved tapping into the unused RBG and blanking lines generated at the Jungle IC.

Jun 20, 2022 · Seeing rgb mod on a high end consumer CRT is night and day vs composite. 8-bit guy's crt is pretty low-end, and as you can see on his video, the difference is night and day vs composite. Short answer: always. It is worth it. Many people will find the picture you're getting perfectly acceptable and wouldn't even think of RGB modding their sets.

Aug 29, 2024 · An RGB-modded TV, or a component CRT with an RGB transcoder can be a budget-friendly alternative to expensive professional monitors. While RGB isn’t for everyone, use the signal format of your choice.

Many CRTs can be modified to have inputs they didn't come with from the factory, such as composite, s-video, component, or even RGB! You can find more information about each modding method below: Adding S-Video

A database of CRT-related information including specifications, common issues, repairs, service manuals, and more.

Jun 13, 2024 · The objective of this board is to simplify the RGB mux mod performed on the CRT. It has few benefits. No need to spend time connecting all the grounds together; Easier to solder the RGB in-line resistors, diodes and 75ohm resistors (this can get quiet messy) Ability to disconnect the back of the CRT TV when needed (10 pin IDC connector)

Apr 9, 2020 · We see a VGA socket on the rear panel going to a resistor network on a piece of protoboard stuck in a vacant space on the PCB, from which a set of lines then go to the signal processing chip. The...

There are five main methods to add RGB to a set. Method 1: OSD Switching. This method is probably the most common RGB mod. It is only possible on sets where the Jungle IC has analog RGB inputs for the on-screen display (OSD).